梯形试体三向千斤顶直剪试验法

    余光富

    余光富. 梯形试体三向千斤顶直剪试验法[J]. 岩土工程学报, 2000, 22(5): 562-564.
    引用本文: 余光富. 梯形试体三向千斤顶直剪试验法[J]. 岩土工程学报, 2000, 22(5): 562-564.
    Yu Guangfu. The direct shear test on the trapezoidal specimen by means of tri-direction-jack[J]. Chinese Journal of Geotechnical Engineering, 2000, 22(5): 562-564.
    Citation: Yu Guangfu. The direct shear test on the trapezoidal specimen by means of tri-direction-jack[J]. Chinese Journal of Geotechnical Engineering, 2000, 22(5): 562-564.

    梯形试体三向千斤顶直剪试验法  English Version

    The direct shear test on the trapezoidal specimen by means of tri-direction-jack

    • 摘要: 介绍一种研究岩体软弱结构面抗剪强度的新的试验方法———梯形试体三向千斤顶直剪试验法。工程实践证明 ,新方法是可行的 ,对类似工程地质条件下的抗剪强度研究具有参考价值
      Abstract: The direct shear test on the trapezoidal specimen by means of tri direction jack is introduced as a new method to study the shear strength of the weak structural plane in the rock mass.It is proved that the method is feasible in the engineering practice and it also has referential value in researching the shear strength of rock with similar geologic conditions.
    计量
    • 文章访问数: 
    • HTML全文浏览量:  0
    • PDF下载量: 
    • 被引次数: 0
    出版历程
    • 发布日期:  2000-09-21

    目录

      /

      返回文章
      返回