气动式四向控制空心圆柱扭剪仪的研制与应用

林楠; 叶冠林; 王建华

doi:10.11779/CJGE201809010

气动式四向控制空心圆柱扭剪仪的研制与应用 English Version

上海交通大学土木工程系,上海 200240

详细信息

作者简介:
林楠(1993- ),男,福建仙游人,硕士研究生,主要研究土体化学特性和物理力学特性。E-mail：fjlinnan66608@sjtu.edu.cn。

通讯作者:
叶冠林，E-mail：ygl@sjtu.edu.cn

中图分类号: TU43
计量
- 文章访问数: 0196
- HTML全文浏览量: 0
- PDF下载量: 0136
出版历程
- 收稿日期: 2017-06-04
- 发布日期: 2018-09-24

Development and application of pneumatic hollow cylinder apparatus with four-direction dynamic loads

Department of Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

摘要

摘要: 上海交通大学既有的空心圆柱扭剪仪只有扭矩可以进行动态控制,可进行动剪应力扭剪试验。为了研究应力主轴旋转对土体力学特性的影响规律,在仪器采用应力控制模式和考虑经济性的前提下,对既有空心圆柱扭剪仪进行气动化改造,使之具备轴力、扭矩和内外围压都可以独立自动控制的四向振动能力。首先介绍改造后仪器（SJTU-HCA）的组成和技术参数,梳理了气动控制相比于液压控制的优点,推导了进行主轴固定单调剪切试验和纯应力主轴循环旋转试验的基本公式,并且设计了仪器控制程序和自动控制算法。通过对砂土任意主应力角的主轴固定单调剪切试验,初步验证了仪器的静态加载能力。通过保持偏应力q、平均主应力p和中主应力参数b这3个控制参数下的纯应力主轴循环旋转试验,验证了仪器的动态加载能力,说明了改造后仪器具备各种复杂应力路径的工作能力。气动式改造经验可为今后研发土工仪器设备提供参考。
- 空心圆柱扭剪仪 /
- 自动控制算法 /
- 主应力角 /
- 应力主轴旋转
Abstract: Only the torque can be dynamically controlled in the traditional hollow cylinder apparatus, and the dynamic shear tests can be carried out. The existing hollow cylinder apparatus is modified to have the four-direction vibration capability, including axial force, torque, internal and external pressures, to study the influences of wave loads. The composition and technical parameters of SJTU-HCA are mainly introduced. The basic formulas for the fixed principal stress axis tests and the principal stress axis cyclic rotation tests are deduced, and the instrument control programs including the automatic control algorithm are prepared. The static loading ability of the apparatus is verified by the fixed principal stress axis tests of any principal stress angle for sand. Further, the dynamic loading capacity of the apparatus is verified by the principal stress axis cyclic rotation tests for sand under the three control parameters including the defection stress q, the average principal stress p and the principal stress parameter b. The results prove that the SJTU-HCA can work with various complex stress paths. The pneumatic improvement experience may provide a reference for the future development of geotechnical apparatus.
- hollow cylinder apparatus /
- automatic control algorithm /
- principal stress angle /
- principal stress axis rotation

HTML全文

参考文献(19)

[1]	HIGHT D W, GENS A, SYMES. M J The development of a new hollow cylinder investigating the effects of principal rotation in soils[J]. Géotechnique, 1983, 33(4): 355-383.
[2]	ISHIHARA K, TOWHATA I.Sand response to cyclic rotation of principal stress directions as induced by wave loads[J]. Soils & Foundations, 1983, 23(4): 11-26.
[3]	MACKY T A, SAADA A S.Dynamics of anisotropic clays under large strains[J]. Journal of Geotechnical Engineering, 1984, 110(4): 487-504.
[4]	姚仰平, 谢定义. 振动拉压扭剪三轴仪及其试验研究[J]. 西安建筑科技大学学报(自然科学版), 1996, 28(2): 129-133. (YAO Yang-ping, XIE Ding-yi.Extension-compression and torsion vibrating triaxial apparatus and experimental investigation[J]. Journal of Xi'an University of Architecture & Technology, 1996, 28(2): 129-133. (in Chinese))
[5]	沈瑞福, 王洪瑾, 周景星. 动主应力轴连续旋转下砂土的动强度[J]. 水利学报, 1996(1): 27-33. (SHEN Rui-fu, WANG Hong-jin, ZHOU Jing-xing.Dynamic strength of sand under cyclic rotation of principal stress directions[J]. Journal of Hydraulic Engineering, 1996(1): 27-33. (in Chinese))
[6]	郭莹. 复杂应力条件下饱和松砂的不排水动力特性试验研究[D]. 大连: 大连理工大学, 2003. (GUO Ying.Experimental studies on undrained cyclic behavior of loose sands under complex stress conditions considering static and cyclic coupling effect[D]. Dalian: Dalian University of Technology, 2003. (in Chinese))
[7]	沈扬, 周建, 张金良, 等. 新型空心圆柱仪的研制与应用[J]. 浙江大学学报(工学版), 2007, 41(9): 1450-1456. (SHEN Yang, ZHOU Jian, ZHANG Jin-liang, et al.Development and application of novel hollow cylinder apparatus[J]. Journal of Zhejiang University (Engineering Science), 2007, 41(9): 1450-1456. (in Chinese))
[8]	童朝霞. 应力主轴循环旋转条件下砂土的变形规律与本构模型研究[D]. 北京: 清华大学, 2008. (TONG Zhao-xia.Research on deformation behavior and constitutive model of sands under cyclic rotation of principal stress axes[D]. Beijing: Tsinghua University, 2008. (in Chinese))
[9]	周正龙, 陈国兴, 吴琪. 四向振动空心圆柱扭剪仪模拟主应力轴旋转应力路径能力分析[J]. 岩土力学, 2016, 37(增刊1): 126-132. (ZHOU Zheng-long, CHEN Guo-xing, WU Qi.Analysis of capabilities of stress paths of HCA to simulate principal stress rotation under four-direction dynamic loads[J]. Rock and Soil Mechanics, 2016, 37(S1): 126-132. (in Chinese))
[10]	YE G L, SHENG J R, YE B, et al.Automated true triaxial apparatus and its application to over-consolidated clay[J]. Geotechnical Testing Journal, 2012, 35(4): 517-528.
[11]	陈超斌, 武朝军, 叶冠林, 等. 小应变三轴试验方法及其在上海软土的初步应用[J]. 岩土工程学报, 2015, 37(增刊2): 37-40. (CHEN Chao-bin, WU Chao-jun, YE Guan-lin, et al.Small-strain triaxial test method and its preliminary application in shanghai soft clay[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(S2): 37-40. (in Chinese))
[12]	潘华, 陈国兴. 动态围压下空心圆柱扭剪仪模拟主应力轴旋转应力路径能力分析[J]. 岩土力学, 2011, 32(6): 1701-1706. (PAN Hua, CHEN Guo-xing.Analysis of capabilities of HCA to simulate stress paths for principal stress rotation under dynamic confining pressure[J]. Rock and Soil Mechanics, 2011, 32(6): 1701-1712. (in Chinese))
[13]	王鑫, 沈扬, 陶明安. 空心圆柱仪模拟波浪荷载下主应力轴旋转应力路径能力探讨[J]. 水利水电技术, 2015, 46(10): 124-129. (WANG Xin, SHEN Yang, TAO Ming-an.Study on ability of hollow cylinder apparatus (HCA) to simulate stress path of principal stress axes rotation under wave load[J]. Water Resources and Hydropower Engineering, 2015, 46(10): 124-129. (in Chinese))
[14]	CAI Y.An experimental study of non- coaxial soil behaviour using hollow cylinder testing[D]. Nottingham: The University of Nottingham, 2010.
[15]	管林波, 周建, 张勋, 等. 中主应力系数和主应力方向对原状黏土各向异性的影响研究[J]. 岩石力学与工程学报, 2010, 29(增刊2): 3871-3877. (GUAN Lin-bo, ZHOU Jian, ZHANG Xun, et al.Study of influence of parameters of intermediate principal stress and principal stress direction on anisotropy of intact clay[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(S2): 3871-3877. (in Chinese))
[16]	于艺林, 张建民, 童朝霞, 等. 定轴排水剪切试验中各向异性砂土的力学响应[J]. 岩土力学, 2011, 32(6): 1637-1642. (YU Yi-lin, ZHANG Jian-min, TONG Zhao-xia, et al.Behavior of anisotropic mica sand under fixed principal stress axes drained shear test[J]. Rock and Soil Mechanics, 2011, 32(6): 1637-1642. (in Chinese))
[17]	蔡燕燕, 俞缙, 余海岁, 等. 考虑主应力轴旋转的砂土变形特性试验研究[J]. 岩石力学与工程学报, 2013, 32(2): 417-424. (CAI Yan-yan, YU Jin, YU Hai-sui, et al.Experimental study of deformation behavior of sand under rotation of principal stress axes[J]. Chinese Journal of Rock Mechanics and Engineering, 2013, 32(2): 417-424. (in Chinese))
[18]	柳艳华, 谢永利. 主应力轴旋转下中主应力系数对软黏土性状的影响[J]. 交通运输工程学报, 2015, 15(3): 27-33. (LIU Yan-hua, XIE Yong-li.Influence of intermediate principal stress coefficient on character of soft clay under rotation of principal stress axes[J]. Journal of Traffic and Transportation Engineering, 2015, 15(3): 27-33. (in Chinese))
[19]	钱建固, 杜子博. 纯应力主轴循环旋转下饱和软黏土的循环弱化及非共轴性[J]. 岩土工程学报, 2016, 38(8): 1-11. (QIAN Jian-gu, DU Zi-bo.Cyclic degradation and non-coaxiality of saturated soft clay subjected to pure rotation of principal stress axis[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(8): 1-11. (in Chinese))