水化状态对含针刺GCL复合衬里抗剪强度的影响分析

林海; 章玲玲

doi:10.11779/CJGE2017S1043

水化状态对含针刺GCL复合衬里抗剪强度的影响分析 English Version

林海^1,2,
章玲玲³

1. 南昌大学建筑工程学院,江西南昌 330031;
2. 岩土力学与堤坝工程教育部重点实验室(河海大学),江苏南京 210098;
3. 江西交通职业技术学院建筑工程系,江西南昌 330013;

基金项目: 江西省青年科学基金项目（20161BAB216115）; 岩土力学与堤坝工程教育部重点实验室开放基金项目（GH201404）; 江西省教育厅科学技术研究项目（GJJ150072）

详细信息

作者简介:
林海(1986-),男,江西上饶人,讲师,从事土力学与基础工程教学和环境岩土工程研究工作。E-mail:linhai@ncu.edu.cn。

计量
- 文章访问数: 286
- HTML全文浏览量: 4
- PDF下载量: 161
出版历程
- 收稿日期: 2016-11-27
- 发布日期: 2017-11-19

Effect of hydration state on shear strength of composite liner with needle-punched GCL

LIN Hai^1,2,
ZHANG Ling-ling³

1. School of Civil Engineering and Architecture, Nanchang University, Nanchang 330031, China;
2. Key Laboratory of Geomechanics and Embankment Engineering of the Ministry of Education, Hohai University, Nanjing 210098, China;
3. Department of Architectural Engineering, Jiangxi V&T College of Communication, Nanchang 330013, China;

摘要

摘要: 针刺GCL和HDPE土工膜（GM）在防渗工程中应用广泛,含多层界面的复合衬里整体抗剪强度是边坡稳定性分析的关键。介绍了含针刺GCL复合衬里的大单剪试验方法,并且对比分析了针刺GCL初始状态分别为干燥和完全水化两种情况下的复合衬里抗剪强度。结果表明,复合衬里的剪切破坏不会发生在干燥针刺GCL内部界面,而GCL干燥状态下的复合衬里单剪强度未必高于GCL完全水化状态下的复合衬里单剪强度。结合含GCL复合衬里的剪切破坏机理,阐述了针刺GCL的水化状态对复合衬里抗剪强度的影响。含GCL复合衬里在不同水化状态下的界面滑移稳定性都应引起工程人员的重视。
- 针刺GCL /
- 单剪 /
- 水化状态 /
- 破坏模式 /
- 抗剪强度
Abstract: Needle-punched GCL and HDPE geomembrane (GM) are widely used in impermeable engineering, and the whole shear strength of multi-layer composite liner with GCL is crucial for the slope stability. A large simple-shear testing method for composite liner with needle-punched GCL is introduced, and the whole peak shear strength of composite liner with dry GCL is compared with that with GCL in hydration state. The results show that the shear failure of composite liner does not occur at the dry GCL internal face. The shear strength of composite liner with dry GCL is not always larger than that with hydrated GCL. Combined with the shear failure mechanism of composite liner with GCL, the influence of GCL hydration state is illustrated for the shear strength of composite liner. The translational interface stability of composite liner with GCL in different hydration states should draw engineers’ attention.
- needle-punched GCL /
- simple shear /
- hydration state /
- failure mode /
- shear strength

HTML全文

参考文献(19)

[1]	钱学德, 施建勇, 刘晓东. 现代卫生填埋场的设计与施工[M]. 北京: 中国建筑工业出版社, 2011. (QIAN Xue-de, SHI Jian-yong, LIU Xiao-dong. Design and construction of modern sanitary loadfills[M]. 2rd ed. Beijing: China Architecture and Building Press, 2011. (in Chinese))
[2]	FOX P J, STARK T D. State-of-the-art report: GCL shear strength and its measurement[J]. Geosynthetics International, 2004, 11(3): 141-175.
[3]	CJJ 113—2007 生活垃圾卫生填埋场防渗系统工程技术规范[S]. 2007. (CJJ 113—2007 Technical code for liner system of municipal solid waste landfill[S]. 2007. (in Chinese))
[4]	钱学德, 施建勇, 刘慧, 等. 垃圾填埋场多层复合衬垫的破坏面特征[J]. 岩土工程学报, 2011, 33(6): 840-845. (QIAN Xue-de, SHI Jian-yong, LIU Hui, et al. Failure interface behavior of multilayer landfill liner system[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(6): 840-845. (in Chinese))
[5]	EID H T. Shear strength of geosynthetic composite systems for design of landfill liner and cover slopes[J]. Geotextiles and Geomembranes, 2011, 29(3): 335-344.
[6]	FOX P J, ROSS J D. Relationship between NP GCL internal and HDPE GMX/NP GCL interface shear strengths[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2011, 137(8): 743-753.
[7]	FOX P J, ROWLAND M G, SCHEITHE J R. Internal shear strength of three geosynthetic clay liners[J]. Journal of Geotechnical and Geoenvironmental Engineering, 1998, 124(10): 933-944.
[8]	GILBERT R B, FERNANDEZ F, HORSFIELD D W. Shear strength of reinforced geosynthetic clay liner[J]. Journal of Geotechnical and Geoenvironmental Engineering, 1996, 122(4): 259-265.
[9]	TRIPLETTE E J, FOX P J. Shear strength of HDPE geomembrane/geosynthetic clay liner interfaces[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127(6): 543-552.
[10]	ZORNBERG J G, MCCARTNEY J S. SWAN J R H. Analysis of a large database of GCL internal shear strength results[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2005, 131(3): 367-380.
[11]	MCCARTNEY J S, ZORNBERG J G, SWAN J R H. Analysis of a large database of GCL-geomembrane interface shear strength results[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(2): 209-223.
[12]	ANDERSON R, RAYHANI M T, ROWE R K. Laboratory investigation of GCL hydration from clayey sand subsoil[J]. Geotextiles and Geomembranes, 2012, 31(10): 31-38.
[13]	DANIEL D E, SHAN H Y, ANDERSON J D. Effects of partial wetting on the performance of the bentonite component of a geosynthetic clay liner[C]// Proceedings of Geosynthetics ’93, Industrial Fabrics Association International. St Paul, 1993: 1483-1496.
[14]	林海, 章玲玲, 阮晓波, 等. 水化针刺GCL+GM复合衬里的单剪破坏特征[J]. 岩土工程学报, 2016, 38(9): 1660-1667. (LIN Hai, ZHANG Ling-ling, RUAN Xiao-bo, et al. Simple-shear failure characteristics of hydrated needle- punched GCL+GM composite liner[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(9): 1660-1667. (in Chinese))
[15]	FOX P J, KIM R H. Effect of progressive failure on measured shear strength of geomembrane/GCL interface[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2008, 134(4): 459-469.
[16]	LIN H, SHI J, QIAN X, ZHANG L. An improved simple shear apparatus for GCL internal and interface stress-displacement measurements[J]. Environmental earth sciences, 2014, 71(8): 3761-3771.
[17]	HEBELER G L, FROST J D, MYERS A T. Quantifying hook and loop interaction in textured geomembrane- geotextile systems[J]. Geotextiles and Geomembranes, 2005, 23(1): 77-105.
[18]	林伟岸, 詹良通, 陈云敏, 等. GCL/GM界面膨润土挤出机理研究[J]. 岩土工程学报, 2010, 32(6): 832-837. (LIN Wei-an, ZHAN Liang-tong, CHEN Yun-min, et al. Mechanism of bentonite extrusion of GCL/GM interface[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(6): 832-837. (in Chinese))
[19]	VUKELIC A, SZAVITS-NOSSAN A., KVASNICKA P. The influence of bentonite extrusion on shear strength of GCL/geomembrane interface[J]. Geotextiles and Geomembranes, 2008, 26(1): 82-90.