隧道管片接缝密封垫防水机理及试验研究

董林伟; 江玉生; 杨志勇; 程晋国; 刘超群; 张加健

doi:10.11779/CJGE201703010

隧道管片接缝密封垫防水机理及试验研究 English Version

中国矿业大学（北京）力学与建筑工程学院,北京 100083

基金项目: 国家科技支撑计划子课题（2013BAB10B02-4）; 联合资助基金项目（U1261212）

详细信息

作者简介:
董林伟(1986- ),男,博士研究生,主要从事隧道与城市地下空间技术的研究。E-mail: dlw860210@163.com。

计量
- 文章访问数: 397
- HTML全文浏览量: 5
- PDF下载量: 296
出版历程
- 收稿日期: 2016-09-05
- 发布日期: 2017-04-24

Experimental study and water-resistant mechanism of gaskets in joints of tunnel segments

School of Mechanics and Civil Engineering, China University of Mining and Technology, Beijing 100083, China

摘要

摘要: 随着盾构隧道的水压升高,加强接缝处的防水是隧道建设的关键。针对隧道管片接缝处密封垫的受力和变形特征进行分析,建立了密封垫防水的力学模型并对密封垫在侧面水压作用下的表面接触压应力进行了理论推导。根据表面接触压应力的组成,对挤压密封阻力和自密封阻力进行了量化,分析得出密封垫的防水性能除受到密封垫自身的接触面积、弹性模量和厚度的影响外,还受到螺栓的有效横截面积、弹性模量和有效夹紧长度等因素的影响。结合工程实例,以一种常用盾构隧道管片的密封垫为研究对象,进行了耐水压力试验和装配力试验。通过对试验现象的解读和数据分析,为下一步隧道管片接缝密封垫的设计和生产以及盾构施工提供参考。
- 接缝防水 /
- 密封垫 /
- 耐水压力 /
- 张开量 /
- 错位量
Abstract: As the water pressure of shield tunnel increases, the key to tunnel construction is to strengthen the water resistance of joints. By analyzing the characteristics of stress and deformation of the gaskets in the joints of tunnel segments, a mechanical model is established, and a formula for the surface contact pressure of the gaskets under lateral water pressure is deduced theoretically. According to the constitution of surface contact pressure, the bearing seal resistance and self seal resistance are quantified. It is concluded that the contact area, elastic modulus and thickness of the gaskets, effective sectional area, elastic modulus, effective tightening length of bolts and other factors have influences on the water resistance. Based on an engineering example, the water pressure resistance tests and assembly tests are carried out on the gaskets of shield tunnel segments. Through the interpretation of experimental phenomena and the data analysis, it may provide a reference for the following design and production of the gaskets in the joints of tunnel segments as well as the construction of shield tunnel.
- water-resistant joint of segment /
- gasket /
- water resistance /
- opening amount /
- dislocation amount

HTML全文

参考文献(17)

[1]	GB 50446—2008 盾构法隧道施工与验收规范[S]. 北京: 中国建筑工业出版社, 2008. (GB 50466—2008 Code for construction and acceptance of shield tunneling method[S]. Beijing: China Architecture & Building Press, 2008. (in Chinese))
[2]	王民. 隧道盾构施工管片橡胶密封垫的材料和结构及产品性能特性[J]. 特种橡胶制品, 2005, 26(1): 42-46. (WANG Min. Material and structure of rubber gasket for shield driven tunnel segment and characteristic of the products[J]. Special Purpose Rubber Products, 2005, 26(1): 42-46. (in Chinese))
[3]	王湛. 水下盾构隧道弹性密封垫防水失效数值模拟研究[J]. 隧道建设, 2015, 35(11): 1164-1168. (WANG Zhan, Numerical study on waterproof failure mechanism of elastic sealing gasket of underwater shield-bored tunnel[J]. Tunnel Construction, 2015, 35(11): 1164-1168. (in Chinese))
[4]	周济民, 何川, 张增. 铁路隧道管片衬砌承受高水压分界值研究[J]. 岩土工程学报, 2011, 33(10): 1583-1589. (ZHOU Ji-min, HE Chuan, ZHANG Zeng. Boundary value of high hydraulic pressure upon segment lining in railway tunnels[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(10): 1583-1589. (in Chinese))
[5]	赵运臣, 肖龙鸽, 刘招伟, 等. 武汉长江隧道管片接缝防水密封垫设计与试验研究[J]. 隧道建设, 2008, 28(5): 570-575. (ZHAO Yun-chen, XIAO Long-ge, LIU Zhao-wei, et al. Experiment study and design on the water tight seal for reinforced concrete segment joint of Wuhan Yangtze River Tunnel[J]. Tunnel Construction, 2008, 28(5): 570-575. (in Chinese))
[6]	金丰年, 范华林, 郭铁英. 地下工程管片密封橡胶承受高水压作用的力学分析[J]. 解放军理工大学学报（自然科学版）, 2001, 2(4): 49-52. (JIN Fen-nian, FAN Hua-lin, GUO Tie-ying. Mechanical analysis of waterproof swelling rubber under high water pressure[J]. Journal of PLA University of Science and Technology, 2001, 2(4): 49-52. (in Chinese))
[7]	刘印, 张冬梅, 黄宏伟. 基于纵向不均匀沉降的盾构隧道渗漏水机理分析[J]. 铁道工程学报, 2011, 152(5): 66-70. (LIU Yin, ZHANG Dong-mei, HUANG Hong-wei. Analysis of mechanism of water leakage induced by longitudinal uneven settlement of shield tunnel[J]. Journal of Railway Engineering Society, 2011, 152(2): 66-70. (in Chinese))
[8]	FAISAL I S, EDWARD J C, STANLEY L P. Concrete segment tunnel lining sealant performance under earthquake loading[J]. Tunneling and Underground Space Technology, 2012, 31: 51-60.
[9]	徐芝纶. 弹性力学简明教程[M]. 北京: 高等教育出版社, 2002. (XU Zhi-lun. A concise course in elasticity[M]. Beijing: Higher Education Press, 2002. (in Chinese))
[10]	MONTGOMERY T S, WILLIAM J M. Introduction to polymer viscoelasticity[M]. New York: A John Wiley & Sons, Inc., 2005.
[11]	雷震宇. 盾构隧道管片橡胶密封垫的优化设计方法[J]. 地下空间与工程学报, 2010, 6(4): 770-774. (LEI Zhen-yu. An optimal design approach for the rubber sealing gasket in shield tunneling[J]. Chinese Journal of Underground Space and Engineering, 2010, 6(4): 770-774. (in Chinese))
[12]	GB 50108—2008地下工程防水技术规范[S]. 北京: 中国建筑工业出版社, 2008. (GB 50108—2008 Technical code for waterproofing of underground engineering works[S]. Beijing: China Architecture & Building Press, 2008. (in Chinese))
[13]	CECS 370 2014隧道工程防水技术规范[S]. 北京: 中国计划出版社, 2014. (CECS 370 2014 Technical code for tunnel engineering waterproofing[S]. Beijing: China Planning Press, 2014. (in Chinese))
[14]	何川, 曾东洋. 盾构隧道结构设计及施工对环境的影响[M]. 成都: 西南交通大学出版社, 2007. (HE Chuan, ZENG Dong-yang. The structure design of shield tunnel and the impact of construction on environment[M]. Chengdu: Southwest Jiaotong University Press, 2007. (in Chinese))
[15]	朱祖熹, 陆明, 柳献. 隧道工程防水设计与施工[M].北京: 中国建筑工业出版社, 2012. (ZHU Zu-xi, LU Ming, LIU Xian. Waterproof design and construction of tunnel engineering[M]. Beijing: China Architecture & Building Press, 2012. (in Chinese))
[16]	GB 18173.4—2010高分子防水材料第4部分: 盾构法隧道管片用橡胶密封垫[S]. 2010. (GB 18173.4—2010 Polymer water-poof materials—part 4: rubber gasket for shield-driven tunnel[S]. 2010. (in Chinese))
[17]	FAISAL S, EDWARD C, STANLEY P. Sealant behavior of gasketed-segmental concrete tunnel lining[C]// 4th International Conference on Earthquake Geotechnical Engineering. Thessaloniki-Greece. Greece, 2007: 1636-1648.

施引文献(15)

期刊类型引用(5)

1.	赵云，杨忠方，张朋，凌道盛. 非饱和砂土中深埋活动门试验松动土压力计算. 岩土工程学报. 2025(04): 769-778 . 本站查看
2.	李明宇，朱康康，陈健，蔺云宏，吴龙骥，靳军伟，杨潇. 考虑土体剪切与接头剪切效应的盾构隧道纵向变形计算模型. 中国铁道科学. 2024(01): 142-154 . 百度学术
3.	秦哲，刘文龙，武发宇，韩继欢，李为腾，冯强，刘永德. 考虑层叠拱传递效应的浅埋硬岩隧道支护力研究及应用. 岩石力学与工程学报. 2024(09): 2165-2177 . 百度学术
4.	陈志敏，刘宝莉，陈骏，翟文浩，李文豪，王铎斌，蔡昀辰. 考虑颗粒组成与含水率的冰碛体成拱规律研究. 现代隧道技术. 2024(05): 200-209 . 百度学术
5.	陈星欣，何明高，施文城，郭力群. 土岩复合地层盾构地中对接法刀盘拆卸不完全拱压力计算. 岩土工程学报. 2024(12): 2652-2660 . 本站查看