宽浅式筒型基础竖向承载力研究

刘梅梅; 练继建; 杨敏; 王海军

doi:10.11779/CJGE201502025

宽浅式筒型基础竖向承载力研究 English Version

天津大学水利工程仿真与安全国家重点实验室,天津 300072

基金项目: 国家国际科技合作专项项目（2012DFA70490）; 高等学校学科创新引智计划项目（B14012）; 天津市应用基础及前沿技术研究计划（青年基金项目）项目（12JCQNJC04000）; 国家创新研究群体科学基金项目（51321065）

详细信息

作者简介:
刘梅梅(1987- ),女,博士,主要从事海港结构设计及稳定性研究工作。E-mail: liumeimei_2008@163.com。

中图分类号: TU47
计量
- 文章访问数: 0227
- HTML全文浏览量: 0
- PDF下载量: 0317
出版历程
- 收稿日期: 2015-02-23
- 发布日期: 2015-03-01

Vertical bearing capacity of wide-shallow bucket foundation

State Key Laboratory of Water Conservancy Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China

摘要

摘要: 通过有限元计算,研究了不同长径比下筒型基础竖向压载作用下的承载特性,分析了竖向荷载作用下宽浅式筒型基础的失效模式,并与试验结果进行对照,数值计算与模型试验的荷载-位移曲线虽存在一定差距,但整体趋势相近。对筒型基础不同部位在承担竖向压载时所承担的比例变化进行分析,其中,筒顶接触反力、内侧摩阻力及端阻力承担90%以上的荷载比例,计算极限承载力时可将筒内土与筒作为一个整体。给出了筒壁土压力的分布形式,在汉森理论的基础上提出适用于宽浅式筒型基础竖向承载力的计算公式,并与有限元、试验结果进行比较,除长径比为1.0的模型外,相对误差均在10%以内。
- 宽浅式筒型基础 /
- 长径比 /
- 模型试验 /
- 有限元法 /
- 位移控制法
Abstract: The criteria of vertical bearing capacity and the failure mode of a wide-shallow bucket foundation are analyzed by using model tests, finite element and theoretical methods. The finite element method (FEM) is used to study the bearing characteristics of the bucket foundation with different aspect ratios (L/D) and to analyze the failure mode of the wide-shallow bucket foundation under vertical load. The FE results are compared with those from the model tests. The load-displacement curves from numerical calculations have certain deviation compared with those from the model tests, but their overall trend is similar. The variation of loading ratio in different parts of the bucket foundation shows that the contact reaction-force of head cover, inner frictional resistance and end resistance share more than 90% of the total vertical load, so the bucket foundation and the soil inside the bucket foundation can be considered as an integrality to calculate the vertical bearing capacity. The distribution of earth pressure is given. The computational formula for the vertical bearing capacity is put forward based on the Hanson theory. The results are compared with those from FEM and model tests, and the relative error is less than 10% except that L/D=1.0. The computational formula is more suitable to the wide-shallow bucket foundation.
- wide-shallow bucket foundation /
- aspect ratio /
- model test /
- finite element method /
- displacement control method

HTML全文

参考文献(16)

[1]	李静, 孙亚胜. 海上风力发电机组的基础形式[J]. 上海电力, 2008, 21(3): 314-317. (LI Jing, SUN Ya-sheng. Foundation form for offshore wind turbine[J]. Shanghai Electric Power, 2008, 21(3): 314-317. (in Chinese))
[2]	LIAN J J, DING H Y, ZHANG P Y, et al. Design of large-scale prestressing bucket foundation for offshore wind turbines[J]. Journal of Tianjin University, 2012, 18: 079-084.
[3]	张金来, 鲁晓兵, 王淑云, 等. 桶形基础极限承载力特性研究[J]. 岩石力学与工程学报, 2005, 24(7): 1169-1172. (ZHANG Jin-lai, LU Xiao-bing, WANG Shu-yun, et al. The characteristics of the bearing capacity of bucket foundation[J]. Chines Journal of Rock Mechanics and Engineering, 2005, 24(7): 1169-1172. (in Chinese))
[4]	马少坤, 于劲, 刘怡林. 浅基础地基极限承载力的有限元分析[J]. 武汉理工大学学报, 2007, 29(4): 99-102. (MA Shao-kun, YU Jin, LIU Yi-lin. Finite element analysis for ultimate bearing capacity of shallow foundation [J]. Journal of Wuhan University of Technology, 2007, 29(4): 99-102. (in Chinese))
[5]	严驰, 李亚坡, 袁中立. 桶形基础竖向承载力理论计算方法及土性参数的敏感性分析[J]. 中国海洋平台, 2004, 19(1): 31-36. (YAN Chi, LI Ya-po, YUAN Zhong-li. The theoretical methods of calculation on vertical bearing capacity of the bucket foundation and sensitivity analysis on the effect of soil parameters[J]. China Offshore Platform, 2004, 19(1): 31-36. (in Chinese))
[6]	DNV-OS-J101 Design of offshore wind turbine structures[S]. 2007.
[7]	API RP 2A-WSD Recommended practice for planning, designing and constructing fixed offshore platforms-working stress design[S]. 2000.
[8]	FD 003—2007 风电机组地基基础设计规定(试行)[S]. 2007. (FD 003—2007 Design regulations on subgrade and foundation for wind turbine generator system[S]. 2007. (in Chinese))
[9]	吴梦喜, 时忠民. 桶形基础的承载特性及承载力计算[J]. 中国造船, 2003, 44(6): 441-446. (WU Meng-xi, SHI Zhong-min. Mechanism and calculation method of the capacity of bucket foundation[J]. Shipbuilding of China, 2003, 44(6): 441-446. (in Chinese))
[10]	武科, 薛洪福, 陈榕, 等. 吸力式桶形基础多桶组合结构承载力特性研究[J]. 防灾减灾工程学报, 2008, 28(4): 484-491. (WU Ke, XUE Hong-fu, CHEN Rong, et al. Studies on bearing capacity of composite multi-bucket structure of sectional bucket foundation[J]. Journal of Disaster Prevention and Mitigation Engineering, 2008, 28(4): 484-491. (in Chinese))
[11]	王金昌, 陈叶开. ABAQUS在土木工程中的应用[M]. 杭州: 浙江大学出版社, 2006: 16-21. (WANG Jin-chang, CHEN Ye-kai. Application of ABAQUS in civil engineering[M]. Hangzhou: Zhejiang University Press, 2006: 16-21. (in Chinese))
[12]	杨进良. 土力学[M]. 北京: 中国水利水电出版社, 2006. (YANG Jin-liang. Soil mechanics[M]. Beijing: China Water Power Press, 2006. (in Chinese))
[13]	刘振纹, 王建华, 袁中立, 等. 负压桶形基础地基竖向承载力研究[J]. 中国海洋平台, 2001, 16(2): 1-6. (LIU Zhen-wen, WANG Jian-hua, YUAN Zhong-li, et al. A study on the vertical bearing capacity of bucket foundation[J]. China Offshore Platform, 2001, 16(2): 1-6. (in Chinese))
[14]	李驰, 王建华, 刘振纹. 软土地基单桶基础循环承载力研究[J]. 岩土工程学报, 2005, 27(9): 1040-1044. (LI Chi, WANG Jian-hua, LIU Wen-zhen. Cyclic bearing capacity of single bucket foundation on soft clay strata[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(9): 1040-1044. (in Chinese))
[15]	周景星, 李广信, 虞石民, 等. 基础工程[M]. 北京: 清华大学出版社, 1996: 142. (ZHOU Jing-xing, LI Guang-xin, YU Shi-min, et al. Foundation engineering[M]. Beijing: Tsinghua University press, 1996: 142. (in Chinese))
[16]	SHERIF EI-Gharbawy. Suction cassion in soft clay[C]// The 18th International Conference on Offshore Mechanics and Arctic Engineering. Paris, 1999.

施引文献(7)

期刊类型引用(2)

1.	刘要来，王堡生，周红波，赵二峰，李章寅. 基于凸集比例因子和WOA-Kriging模型的重力坝非概率可靠性分析. 长江科学院院报. 2025(03): 164-170 . 百度学术
2.	魏博文，张升，袁冬阳，徐富刚. 基于概率—模糊—区间混合模型和改进分枝限界法的重力坝可靠性分析方法. 水利学报. 2022(12): 1476-1489 . 百度学术