Advanced Search
  • Indexed in Scopus
  • Source Journal for Chinese Scientific and Technical Papers and Citations
  • Included in A Guide to the Core Journal of China
  • Indexed in Ei Compendex
Volume 34 Issue 9
Turn off MathJax
Article Contents
Abstract
References
DAI Guo-liang, GONG Wei-ming, CHEN Long. Modified method for shaft resistance of rock-socketed piles based on Hoek-Brown criterion[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(9): 1746-1752.
Citation: DAI Guo-liang, GONG Wei-ming, CHEN Long. Modified method for shaft resistance of rock-socketed piles based on Hoek-Brown criterion[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(9): 1746-1752.
shu

Modified method for shaft resistance of rock-socketed piles based on Hoek-Brown criterion

  • 1. School of Civil Engineering, Southeast University, Nanjing 210096, China; 2. Key Laboratory for RC and PRC Structures of Ministry of Education, Southeast University, Nanjing 210096, China

More Information
  • Received Date: August 29, 2011
  • Published Date: October 09, 2012
    Graphical Abstract
    • Abstract
  • Using the two dimensional Howk-Brown criterion as the rock failure one, the horizontal normal stresses resulted from the variation of pile diameter under restriction of surrounding rock and the self weight of soil and rock penetrated by piles are considered based on the mechanism of shear-slip-dilation. A modified method for calculating the ultimate shaft resistance of rock-socketed piles is put forward based on the methods in the literature. The affecting aspects are analyzed, including the axial force, the rock strength modulus, the tension strength coefficient, the ratio of rock modulus to pile modulus, the pile diameter and the ratio of socket depth to pile diameter. The results indicate that the ultimate shaft resistance of rock-socket piles increases with the increase of the axial load, the rock strength modulus and the tension strength coefficient and the ratio of rock modulus to pile modulus. It decreases with the increase of the pile diameter and the socket ratio.
    • FullText(HTML)
    • References (15)
  • [1]
    PELLS P J N, ROWE R K, TURNER R M. An experimental investigation into side shear for socket piles in sandstone[C]// Proceedings of the International Conference on Structural Foundations On Rock. Sydney, 1980(1): 291–302.
    [2]
    HORVATH R G, KENNEY T C, TROW W A. Results of tests to determine shaft resistance of rock-socket drilled piers[C]// Proceedings of the International Conference on Structural Foundations on Rock. Sydney, 1980(1): 349–361.
    [3]
    KULHAWY F H, GOODMAN R E. Design of foundations on discontinuous rock[C]// Proceedings of the International Conference on Structural Foundations on Rock. Sydney, 1980(1): 209–220.
    [4]
    ROWE R K, ARMITAGE H. Theoretical solutions for axial deformation of drilled in rock[J]. Can Geotech J, 1987, 24(1): 114–125.
    [5]
    ROWE R K, ARMITAGE H. A design method for drilled piers in soft rock[J]. Can Geotech J, 1987, 24(1): 126–142.
    [6]
    DYKEMAN P, VALSANGKAR A J. Model studies of socket caissons in soft rock[J]. Can Geotech J, 1996, 33(5): 747–759.
    [7]
    O'NEILL M W, HASSAN K H. Drilled shafts: effects of construction on performance and design criteria[C]// Proceedings of the International Conference on Design and Construction of Deep Foundations U S Federal Highway Administration, 1994, 1: 137–187.
    [8]
    CARRUBBA P. Skin friction of large-diameter piles socket into rock[J]. Can Geotech J, 1997, 34(2): 230–240.
    [9]
    SERRANO A, OLALLAB C. Shaft resistance of a pile embedded in rock[J]. International Journal of Rock Mechanics & Mining Sciences, 2004, 41(1): 21–35
    [10]
    HOEK E, CARRANZA-TORRES C, CORKUM B. Hoek-Brown failure criterion—2002 edition[C]// Proceedings of the North American Rock Mechanics Society, Toronto. 2002: 267–273.
    [11]
    雷孝章, 何思明. 嵌岩桩极限侧阻力研究[J]. 四川大学学报(工程科学版). 2005, 37(4): 7–10 (LEI Xiao-zhang, HE Si-ming. Study on ultimate resistance of rock-socket pile[J]. Journal of Sichuan University (Engineering Science Edtion), 2005, 37(4): 7–10 (in Chinese))
    [12]
    American Association of State Highway and Transportation Officials(AASHTO). Standard specifications for highway bridges[M]. Washington D C: American Association of State Highway and Transport Officials, 1989.
    [13]
    KULHAWY F H, PHOON K K. Drilled shaft side resistance in clay soil to rock[C]// Proceedings Conference on Design and Performance of Deep Foundation: Piles and Piers in soil and Soft Rock. Geotechnical Special Publication, 1993, 38: 172–183.
    [14]
    WILLIAMS A F, PELLS P J N. Side resistance of rock sockets in sand stone, mudstone and shale [J].Can Geotech J, 1981, 18(4): 502–513.
    [15]
    PELLS P J N, TURNER R M. Elastic solutions for the design and analysis of rock-socketed piles[J]. Can Geotech J, 1979, 16(3): 481–486.
    • Related Articles
  • Supplements (0)

Catalog

    Get Citation
    PDF
    XML
    Article views (1295) PDF downloads (319) Cited by()
    Related
    Website Copyright © 2010 Editorial By Chinese Journal of Geotechnical Engineering 苏ICP备05007122号-11公安联网备案号：32010602011255
    Editorial Office address：34 Hujuguan,Nanjing 210024,ChinaPostal Code：210024Tel：025-85829534，85829556E-mail: ge@nhri.cn

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return