Experimental study on vertical bearing mechanism of jet grouting jacked steel composite piles in low-clearance environments

WANG Shuguang; YIN Hao; DUAN Qiwei; WANG Haoyu; LI Qinrui; LI Zhan

doi:10.11779/CJGE20240035

Volume 47 Issue 6

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Geotechnical Engineering > 2025 > 47(6): 1318-1326. > DOI: 10.11779/CJGE20240035

WANG Shuguang, YIN Hao, DUAN Qiwei, WANG Haoyu, LI Qinrui, LI Zhan. Experimental study on vertical bearing mechanism of jet grouting jacked steel composite piles in low-clearance environments[J]. Chinese Journal of Geotechnical Engineering, 2025, 47(6): 1318-1326. DOI: 10.11779/CJGE20240035

Citation:

PDF (23210 KB)

Experimental study on vertical bearing mechanism of jet grouting jacked steel composite piles in low-clearance environments

WANG Shuguang^{1, 2, 3,},
YIN Hao¹,
DUAN Qiwei^{1, 3},
WANG Haoyu^{1, 3},
LI Qinrui^{1, 3},
LI Zhan^{1, 3}

1.
Institute of Foundation Engineering, China Academy of Building Research, Beijing 100013, China
2.
Disaster Prevention Research Center, Ministry of Housing and Urban-Rural Development, Beijing 100013, China
3.
Beijing Existing Building Renovation Engineering Technology Research Center, Beijing 100013, China

More Information

Received Date: January 10, 2024
Available Online: September 26, 2024

Graphical Abstract

Abstract

Abstract

The jet grouting jacked composite pile is a kind of new patented technology which is suitable to the construction in the existing buildings with low clearance. The vertical bearing mechanism of the jet grouting jacked composite piles is studied through the indoor full size tests and compared with that of the jacked piles, jet grouting piles and cast-in-place piles. The tests show that the jet grouting jacked composite pile is mainly characterized by a kind of friction pile. The vertical bearing capacity of the jet grouting jacked composite pile is higher than that of the jet grouting pile and the cast-in-place pile with the same diameter. The vertical bearing capacity of the jacked pile is the lowest due to the smaller diameter. The jet grouting pile fails due to the fracture of the pile shaft materials on the top of the pile under the ultimate load, and the side resistance and tip resistance do not fully play their roles; since the pile body strength of the jet grouting jacked composite pile is improved by jacking the core pile in the jet grouting pile, the side resistance can fully play its roles and improve the bearing capacity. Compared to that of the cast-in-place pile, the interface between jet grouting jacked composite pile and soil is irregular and the shear behavior of the interface is improved by grouting, and the vertical bearing capacity of the jet grouting composite pile is higher than that of the cast-in-place pile. Based on the test results and from an engineering practical point of view, a modified expression for the vertical ultimate bearing capacity of single jet grouting jacked composite pile is obtained by introducing an amplification coefficient for the side resistance and a reduction coefficient for the tip resistance to hat of single cast-in-place pile. The values of the relevant parameters are recommended.
- jet grouting jacked steel composite pile,
- bearing mechanism,
- indoor full size test,
- jacked pile,
- jet grouting pile,
- cast-in-place pile

FullText(HTML)

References (15)

References

[1]	李湛, 李钦锐, 李兆明. 历史建筑地下空间拓展工程[J]. 地下空间与工程学报, 2022, 18(3): 714-723. LI Zhan, LI Qinrui, LI Zhaoming. Underground space expansion project of a historical building[J]. Chinese Journal of Underground Space and Engineering, 2022, 18(3): 714-723. (in Chinese)
[2]	王曙光, 段启伟, 等. 既有建筑低净空下旋喷静压复合桩施工方法及应用装置. ZL202111077103.4[P]. 2023.07.04. WANG Shuguang, DUAN Qiwei, et al. Construction method and application device for the jet grouting jacked composite pile which is suitable to the construction in the existing buildings with low clearance: CHINA, ZL202111077103.4[P]. 2023-07-04. (in Chinese)
[3]	凌光容, 安海玉, 谢岱宗, 等. 劲性搅拌桩的试验研究[J]. 建筑结构学报, 2001, 22(2): 92-96. LING Guangrong, AN Haiyu, XIE Daizong, et al. Experimental study on concrete core mixing pile[J]. Journal of Building Structures, 2001, 22(2): 92-96. (in Chinese)
[4]	刘金波, 柳致富, 等. 我国岩土工程施工技术的成就-复合桩[J]. 施工技术, 2011, 50(13): 69-75. LUI Jinbo, LIU Zhifu, et al. Achievements of geotechnical engineering construction technology in China-composite pile[J]. Construction Technology, 2011, 50(13): 69-75. (in Chinese)
[5]	李俊才, 张永刚, 邓亚光, 等. 管桩水泥土复合桩荷载传递规律研究[J]. 岩石力学与工程学报, 2014, 33(增刊1): 3068-3076. LI Juncai, ZHANG Yonggang, HUA Xiaolong. Load transfer mechanism of composite pile composed of jet-mixing cement and phc pile with core concrete[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(S1): 3068-3076. (in Chinese)
[6]	彭涛, 李立业, 章定文. 水泥土-混凝土界面特性试验研究[J]. 现代交通技术, 2017, 14(3): 19-23. PENG Tao, LI Liye, ZHANG Dingwen. Experimental research on interfacial performance between cement treated soil and concrete[J]. Modern Transportation Technology, 2017, 14(3): 19-23. (in Chinese)
[7]	吴迈, 赵欣, 窦远明, 等. 水泥土组合桩室内试验研究[J]. 工业建筑, 2004, 34(11): 45-48. WU Mai, ZHAO Xin, DOU Yuanming, et al. Experimental study on stiffened DCM pile in laboratory[J]. Industrial Construction, 2004, 34(11): 45-48. (in Chinese)
[8]	卜发东, 宋义仲, 李建明, 等. 水泥土复合管桩复合地基技术及应用[J]. 山东建筑大学学报, 2017, 32(3): 276-283. BU Fadong, SONG Yizhong, LI Jianming, et al. Technology of pipe pile embedded in cement soil composite foundation and its application[J]. Journal of Shandong Jianzhu University, 2017, 32(3): 276-283. (in Chinese)
[9]	刘汉龙, 任连伟, 郑浩, 等. 高喷插芯组合桩荷载传递机制足尺模型试验研究[J]. 岩土力学, 2010, 31(5): 1395-1401. LIU Hanlong, REN Lianwei, ZHENG Hao, et al. Full-scale model test on load transfer mechanism for jet grouting soil-cement-pile strengthened pile[J]. Rock and Soil Mechanics, 2010, 31(5): 1395-1401. (in Chinese)
[10]	建筑地基基础设计规范: GB 50007—2011[S]. 北京: 中国计划出版社, 2012. Code for Design of Building Foundation: GB 50007—2011[S]. Beijing: China Planning Press, 2012. (in Chinese)
[11]	刘金波. 干作业复合灌注桩的试验研究及理论分析[D]. 北京: 中国建筑科学研究院, 2000. LIU Jinbo. Experimental Study and Theoretical Analysis of Dry-Working Composite Cast-in-Place Pile[D]. Beijing: China Academy of Building Research, 2000. (in Chinese)
[12]	钢结构设计标准: GB 50017—2017[S]. 北京: 中国建筑工业出版社, 2018. Standard for Design of Steel Structures: GB 50017—2017[S]. Beijing: China Architecture & Building Press, 2018. (in Chinese)
[13]	混凝土结构设计规范: GB 50010—2002[S]. 北京: 中国建筑工业出版社, 2004. Code for Design of Concrete Structures: GB 50010—2002[S]. Beijing: China Architecture & Building Press, 2004. (in Chinese)
[14]	郑刚, 顾晓鲁, 姜忻良. 水泥搅拌桩复合地基承载力辨析[J]. 岩土工程学报, 2000, 22(4): 487-489. https://cge.nhri.cn/article/id/10549 ZHENG Gang, GU Xiaolu, JIANG Xinliang. Discussion on the bearing capacity of cement treated composite foundation[J]. Chinese Journal of Geotechnical Engineering, 2000, 22(4): 487-489. (in Chinese) https://cge.nhri.cn/article/id/10549
[15]	劲性复合桩技术规程: JGJ/T 327—2014[S]. 北京: 中国建筑工业出版社, 2014. Technical Specification for Strength Composite Piles: JGJ/T 327—2014[S]. Beijing: China Architecture & Building Press, 2014. (in Chinese)

[1]	XIN Gong-feng, ZHOU Hai-zuo, ZHANG Wen-liang, ZHENG Gang, YANG Xin-yu, YU Xiao-xuan, XU Shi-qian. Influences of column cap on progressive failure and stability characteristics of column-supported embankments[J]. Chinese Journal of Geotechnical Engineering, 2022, 44(S1): 63-67. DOI: 10.11779/CJGE2022S1012
[2]	ZHANG Jiang-wei, LI Xiao-jun, WANG Xiao-ming, CHI Ming-jie, WANG Yu-shi. Method for judging seismic stability state of soil slopes[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(11): 2096-2102. DOI: 10.11779/CJGE201811016
[3]	ZHAO Ming-hua, XIA Run-yan, YIN Ping-bao, YANG Chao-wei, XU Zhuo-jun. Load transfer mechanism of socketed piles considering shear dilation effects of soft rock[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(6): 1005-1011. DOI: 10.11779/CJGE201406003
[4]	WANG Zhe, ZHUANG Yingchun. Analytical analysis of vertical load-transfer of large-diameter cast-in-situ concrete tubular piles[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(10): 1488-1492.
[5]	LOU Xiaoming, SUN Xiaofeng. Analysis on load transfer for large area composite foundation with rigid piles and cushions[J]. Chinese Journal of Geotechnical Engineering, 2006, 28(11): 2027-2030.
[6]	ZHANG Fan, GONG Weiming, DAI Guoliang. Experimental research on the load transfer mechanism of super-long large diameter bored pile with the self-balanced load test method[J]. Chinese Journal of Geotechnical Engineering, 2006, 28(4): 464-469.
[7]	WANG Zhe, ZHOU Jian, GONG Xiaonan. Analysis of axial load-transfer of large-diameter tubular pile using cast-in-situ concrete[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(10): 1185-1189.
[8]	HAN Xuan, ZHANG Nairui. In-situ tests on load transfer mechanism of group piled foundation in Beijing[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(1): 74-80.
[9]	Zhang Huiming, Zeng Qiaoling. Steady state strength of sand:concepts and experiment[J]. Chinese Journal of Geotechnical Engineering, 1999, 21(2): 95-100.
[10]	Liu Songyu, Ji Peng, Wei Jie. Load transfer behavior of large diameter cast in place pile embedded in soft rock[J]. Chinese Journal of Geotechnical Engineering, 1998, 20(4): 61.