Development and performance tests on NS-2 horizontal unidirectional centrifugal shaker

GU Xing-wen; REN Guo-feng; WANG Nian-xiang; XU Guang-ming

doi:10.11779/CJGE2020S2013

Volume 42 Issue S2

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Geotechnical Engineering > 2020 > 42(S2): 72-76. > DOI: 10.11779/CJGE2020S2013

GU Xing-wen, REN Guo-feng, WANG Nian-xiang, XU Guang-ming. Development and performance tests on NS-2 horizontal unidirectional centrifugal shaker[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(S2): 72-76. DOI: 10.11779/CJGE2020S2013

Citation:

PDF (1307 KB)

Development and performance tests on NS-2 horizontal unidirectional centrifugal shaker

Department of Geotechnical Engineering, Nanjing Hydraulic Research Institute, Nanjing 210024, China

More Information

Received Date: August 06, 2020
Available Online: December 07, 2022

Graphical Abstract

Abstract

Abstract

The dynamic centrifuge model test technology based on the geo-centrifugal shaking table system is the most effective and advanced research method and test technology for geotechnical engineering seismic problems. The principle is that the real dynamic response of the prototype under the actual stress condition can be reproduced by means of the centrifugal shaking table system installed on the centrifuge, which is used to restore the same stress level with the prototype. The key design technology and performance index of the NS-2 centrifugal shaker system are mainly introduced, which can simulate the horizontal unidirectional seismic response with effective load less than 500 kg under 80g. The performance index of the centrifugal shaker system is preliminarily verified by the dynamic centrifugal model tests on a rockfill dam with asphalt concrete core, which completely meets the practical needs of the project.
- centrifuge,
- shaking table,
- performance evaluation,
- model test

FullText(HTML)

References (7)

References

[1]	侯瑜京. 土工离心机振动台及其试验技术[J]. 中国水利水电科学研究院学报, 2006, 4(1): 15-22. doi: 10.3969/j.issn.1672-3031.2006.01.003 HOU Yu-jing. Centrifuge shakers and testing technique[J]. Journal of China Institute of Water Resources and Hydropower Research, 2006, 4(1): 15-22. (in Chinese) doi: 10.3969/j.issn.1672-3031.2006.01.003
[2]	章为民, 日下部治. 砂性地基地震反应离心模型试验研究[J]. 岩土工程学报, 2001, 23(1): 28-31. doi: 10.3321/j.issn:1000-4548.2001.01.006 ZHANG Wei-min, KUSAKABE O. Dynamic centrifuge model test of sandy layer[J]. Chinese Journal of Geotechnical Engineering, 2001, 23(1): 28-31. (in Chinese) doi: 10.3321/j.issn:1000-4548.2001.01.006
[3]	张建民, 于玉贞, 濮家骝, 等. 电液伺服控制离心机振动台系统研制[J]. 岩土工程学报, 2004, 26(6): 843-845. doi: 10.3321/j.issn:1000-4548.2004.06.023 ZHANG Jian-min, YU Yu-zhen, PU Jia-liu, et al. Development of a shaking table in electro-hydraulic servo-control centrifuge[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(6): 843-845. (in Chinese) doi: 10.3321/j.issn:1000-4548.2004.06.023
[4]	王年香, 章为民. 混凝土面板堆石坝动态离心模型试验研究[J]. 岩土工程学报, 2003, 25(4): 504-507. doi: 10.3321/j.issn:1000-4548.2003.04.027 WANG Nian-xiang, ZHANG Wei-min. Dynamic centrifuge model test for concrete face rock fill dam[J]. Chinese Journal of Geotechnical Engineering, 2003, 25(4): 504-507. (in Chinese) doi: 10.3321/j.issn:1000-4548.2003.04.027
[5]	TAYLOR R N. Geotechnical Centrifuge Technology[M]. Glasgow: Blackie Academic and Professional, 1995.
[6]	王年香, 章为民. 土工离心模型试验技术与应用[M]. 北京: 中国建筑工业出版社, 2015. WANG Nian-xiang, ZHANG Wei-min. Geotechnical Centrifuge Technology and Application[M]. Beijing: China Building Industry Press, 2015. (in Chinese)
[7]	章为民, 赖忠中, 徐光明. 电液式土工离心机振动台的研制[J]. 水利水运工程学报, 2002(1): 63-66. doi: 10.3969/j.issn.1009-640X.2002.01.014 ZHANG Wei-min, LAI Zhong-zhong, XU Guang-ming. Development of an electrohydraulic shake table for the centrifuge[J]. Hydro-science and Engineering, 2002(1): 63-66. (in Chinese) doi: 10.3969/j.issn.1009-640X.2002.01.014