• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
ZENG Jia-jun, ZHANG Zhi-jun, ZHANG Xu-xu, PU Cheng-zhi. Fracture test and analysis of horizontal fissure rock-like specimens influenced by apertures[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(3): 523-532. DOI: 10.11779/CJGE202003014
Citation: ZENG Jia-jun, ZHANG Zhi-jun, ZHANG Xu-xu, PU Cheng-zhi. Fracture test and analysis of horizontal fissure rock-like specimens influenced by apertures[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(3): 523-532. DOI: 10.11779/CJGE202003014

Fracture test and analysis of horizontal fissure rock-like specimens influenced by apertures

More Information
  • Received Date: June 16, 2019
  • Available Online: December 07, 2022
  • In order to explore the fracture mechanism of horizontal fissure rock mass with different apertures, single-fissure rock mass specimens with different apertures are prepared by using cement mortar. The uniaxial loading tests are carried out on the prepared rock mass specimens based on the RMT-150B rock mechanics testing machine. The results show that under the same length of prefabricated fissure, with the decrease of fissure apertures, the initiation position of microcracks shifts from the middle of prefabricated fissure to the tip. To verify this phenomenon, a parallel bonded contact element based on PFC numerical simulation platform is used to establish a numerical model for fissure body for analysis. Under that condition, the boundary conditions of numerical calculation are consistent with the test environment, the crack initiation modes and fracture characteristics which are consistent with the test results are obtained. In order to further explore the initiation and propagation mechanism of micro-cracks in horizontally fissured rock mass, based on the yield characteristics of crack surface deformation, the evolution law of particle displacement field in the numerical model of micro-crack initiation and propagation is considered, a simplified model for fixed beam is proposed, and the mechanism of micro-crack initiation and propagation in horizontally fissured rock mass with different apertures is analyzed and explained.
  • [1]
    CAO P, LIU T, PU C, et al. Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression[J]. Engineering Geology, 2015, 187: 113-121. doi: 10.1016/j.enggeo.2014.12.010
    [2]
    CHENG H, ZHOU X, ZHU J, et al. The effects of crack openings on crack initiation, propagation and coalescence behavior in rock-like materials under uniaxial compression[J]. Rock Mechanics & Rock Engineering, 2016, 49(9): 1-14.
    [3]
    WONG L N Y. Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression[J]. International Journal of Rock Mechanics & Mining Sciences, 2009, 46(2): 239-249.
    [4]
    ZHANG X P, WONG L N Y. Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach[J]. Rock Mechanics & Rock Engineering, 2012, 45(5): 711-737.
    [5]
    刘伟韬, 申建军. 含单裂纹真实岩石试件断裂模式的力学试验研究[J]. 岩石力学与工程学报, 2016, 35(6): 1182-1189. doi: 10.13722/j.cnki.jrme.2015.0710

    LIU Wei-tao, SHEN Jian-jun. Experimental study of propagation mode of crack in real rock specimens with a single crack[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(6): 1182-1189. (in Chinese) doi: 10.13722/j.cnki.jrme.2015.0710
    [6]
    WANG Y, TANG J, DAI Z, et al. Experimental study on mechanical properties and failure modes of low-strength rock samples containing different fissures under uniaxial compression[J]. Engineering Fracture Mechanics, 2018, 197: 1-20. doi: 10.1016/j.engfracmech.2018.04.044
    [7]
    王桂林, 张亮, 许明, 等. 单轴压缩下非贯通节理岩体损伤破坏能量演化机制研究[J]. 岩土工程学报, 2019, 41(4): 639-647. https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201904008.htm

    WANG Gui-lin, ZHANG Liang, XU Ming, et al. Energy damage evolution mechanism of non-across jointed rock mass under uniaxial compression[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(4): 639-647. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201904008.htm
    [8]
    胡波, 杨圣奇, 徐鹏, 等. 单裂隙砂岩蠕变模型参数时间尺度效应及颗粒流数值模拟研究[J]. 岩土工程学报, 2019, 41(5): 864-873. https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201905011.htm

    HU Bo, YANG Sheng-qi, XU Peng, et al. Time-scale effect of the creep model parameters and particle flow simulation of sandstone with a single crack[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(5): 864-873. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201905011.htm
    [9]
    王斌, 宁勇, 冯涛, 等. 单轴压缩条件下锚杆影响脆性岩体破裂的细观机制[J]. 岩土工程学报, 2018, 40(9): 1593-1600. https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201809005.htm

    WANG Bin, NING Yong, FENG Tao, et al. Meso-mechanism of rock failure influenced by bolt anchorage under uniaxial compression loading[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(9): 1593-1600. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201809005.htm
    [10]
    蒋明镜, 张宁, 申志福, 等. 含裂隙岩体单轴压缩裂纹扩展机制离散元分析[J]. 岩土力学, 2015, 36(11): 3293-3301. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201511034.htm

    JIANG Ming-jing, ZHANG Ning, SHEN Zhi-fu, et al. DEM analyses of crack propagation in flawed rock mass under uniaxial compression[J]. Rock and Soil Mechanics, 2015, 36(11): 3293-3301. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201511034.htm
    [11]
    袁媛, 潘鹏志, 赵善坤, 等. 基于数字图像相关法的含填充裂隙大理岩单轴压缩破坏过程研究[J]. 岩石力学与工程学报, 2018, 37(2): 339-351. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201802008.htm

    YUAN Yuan, PAN Peng-zhi, ZHAO Shan-kun, et al. The failure process of marble with filled crack under uniaxial compression based on digital image correlation[J]. Chinese Journal of Rock Mechanics and Engineering, 2018, 37(2): 339-351. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201802008.htm
    [12]
    左江江, 李臣林, 腾俊洋, 等. 充填物对含孔洞大理岩力学特性影响规律试验研究[J]. 工程科学学报, 2018, 40(7): 776-782. https://www.cnki.com.cn/Article/CJFDTOTAL-BJKD201807002.htm

    ZUO Jiang-jiang, LI Chen-lin, TENG Jun-yang, et al. Experimental study of the influence of the filling material on the mechanical properties of marble with holes[J]. Chinese Journal of Engineering, 2018, 40(7): 776-782. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BJKD201807002.htm
    [13]
    郭奇峰, 武旭, 蔡美峰, 等. 预制裂隙花岗岩的强度特征与破坏模式试验[J]. 工程科学学报, 2019, 41(1): 43-52. https://www.cnki.com.cn/Article/CJFDTOTAL-BJKD201901004.htm

    GUO Qi-feng, WU Xu, CAI Mei-feng, et al. Experiment on the strength characteristics and failure modes of granite with pre-existing cracks[J]. Chinese Journal of Engineering, 2019, 41(1): 43-52. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BJKD201901004.htm
    [14]
    LIU T, LIN B, ZOU Q, et al. Mechanical behaviors and failure processes of precracked specimens under uniaxial compression: a perspective from microscopic displacement patterns[J]. Tectonophysics, 2016(672/673): 104-120.
    [15]
    LIU T, LIN B, YANG W. Mechanical behavior and failure mechanism of pre-cracked specimen under uniaxial compression[J]. Tectonophysics, 2017(712/713): 330-343.
    [16]
    JIN J, CAO P, CHEN Y, et al. Influence of single flaw on the failure process and energy mechanics of rock-like material[J]. Computers & Geotechnics, 2017, 86: 150-162.
    [17]
    MIAO S, PAN P, WU Z, et al. Fracture analysis of sandstone with a single filled flaw under uniaxial compression[J]. Engineering Fracture Mechanics, 2018, 204: 319-343.
    [18]
    蒲成志, 曹平, 陈瑜, 等. 不同裂隙相对张开度下类岩石材料断裂试验与破坏机理[J]. 中南大学学报(自然科学版), 2011, 42(8): 2394-2399. https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201108037.htm

    PU Cheng-zhi, CAO Ping, CHEN Yu, et al. Fracture test and failure mechanism of rock-like material of relatively different fracture apertures[J]. Journal of Central South University(Science and Technology), 2011, 42(8): 2394-2399. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201108037.htm
    [19]
    ZHANG X P, ZHANG Q, WU S. Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading rates[J]. Computers & Geotechnics, 2017, 83: 83-97.
    [20]
    李夕兵, 罗琳, 黎崇金. 考虑岩石交界面方向效应的巴西劈裂试验研究[J]. 工程科学学报, 2017, 39(9): 1295-1304. https://www.cnki.com.cn/Article/CJFDTOTAL-BJKD201709001.htm

    LI Xi-bing, LUO Lin, LI Chong-jin. Experimental study of directivity effect of rock interface under Brazilian splitting[J]. Chinese Journal of Engineering, 2017, 39(9): 1295-1304. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BJKD201709001.htm
    [21]
    YANG S Q, TIAN W L, HUANG Y H. Failure mechanical behavior of pre-holed granite specimens after elevated temperature treatment by particle flow code[J]. Geothermics, 2018, 72: 124-137.
    [22]
    岑夺丰, 黄达. 高应变率单轴压缩下岩体裂隙扩展的细观位移模式[J]. 煤炭学报, 2014, 39(3): 436-444. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201403008.htm

    CEN Duo-feng, HUANG Da. Mesoscopic displacement modes of crack propagation of rock mass under uniaxial compression with high strain rate[J]. Journal of China Coal Society, 2014, 39(3): 436-444. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201403008.htm
    [23]
    ZHANG X P, LIU Q, WU S, et al. Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression[J]. Engineering Geology, 2015, 199: 74-90.
    [24]
    黄丹, 李小青. 基于微裂纹发育特性的大理岩特征强度数值模拟研究[J]. 岩土力学, 2017, 38(1): 253-262. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201701033.htm

    HUANG Dan, LI Xiao-qing. Numerical simulation research on characteristic strength of marble based on development of microcrack[J]. Rock and Soil Mechanics, 2017, 38(1): 253-262. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201701033.htm
    [25]
    张科, 刘享华, 李昆, 等. 含孔多裂隙岩石力学特性与破裂分形维数相关性研究[J]. 岩石力学与工程学报, 2018, 37(12): 2785-2794. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201812014.htm

    ZHANG Ke, LIU Xiang-hua, LI Kun, et al. Investigation on correlation between mechanical characteristic and fractal dimension of fracturing of rock containing a hole and multi-flaws[J]. Chinese Journal of Rock Mechanics and Engineering, 2018, 37(12): 2785-2794. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201812014.htm
  • Cited by

    Periodical cited type(2)

    1. 孙建生. 投影方向极值原理的三维滑动面应力合矢量极限平衡抗滑稳定计算理论模型. 岩土工程学报. 2024(12): 2629-2641 . 本站查看
    2. 付文光. 对“稳定安全系数计算公式中荷载与抗力错位影响探讨”质疑的答复. 岩土工程学报. 2021(11): 2147-2148 . 本站查看

    Other cited types(0)

Catalog

    Article views (326) PDF downloads (111) Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return