Citation: | WANG Cheng-hua, LI Ya-jie. Some problems in numerical analyses of basal upheaval stability of foundation pits[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(z2): 41-44. DOI: 10.11779/CJGE2017S2011 |
[1] |
林 鹏. 基于板桩墙支护的基坑开挖模型试验的三维数值分析及变形预测[D]. 南昌: 华东交通大学, 2008. (LIN Peng. Based on 3D numerical analysis of the sheet pile wall supporting model and deformation predicting for deep foundation pit[D]. Nanchang: East China Jiaotong University, 2008. (in Chinese))
|
[2] |
GOH A T C. Estimating basal-heave stability for braced excavations in soft clay[J]. Journal of Geotechnical Engineering, ASCE, 1994, 120(8):1430-1436.
|
[3] |
李亚杰, 王成华. 基于大比尺基坑模型试验的基坑隆起稳定性参数分析[R]. 天津: 天津大学, 2017. (LI Ya-jie, WANG Cheng-hua. A parametric analysis of the basal upheaval stability based on large-scale excavation model tests[R]. Tianjin: Tianjin University, 2017. (in Chinese))
|
[4] |
CAI F, UGAI K, HAGIWARA T. Base stability of circular excavations in soft clay[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2002, 128(8): 702-706.
|
[5] |
FAHEEM H, CAI F, UGAI K. Three-dimensional base stability of rectangular excavations in soft soils using FEM[J]. Computers and Geotechnics, 2004(31): 67-74.
|
[6] |
张 震, 冯 虎, 刘国彬. 基坑抗隆起稳定三维分析的极限平衡法[J]. 沈阳建筑大学学报(自然科学版), 2012, 28(1): 37-43. (ZHANG Zhen, FENG Hu, LIU Guo-bin. A three-dimensional limit equilibrium method for basal stability analysis[J]. Journal of Shenyang Jianzhu University (Natural Science), 2012, 28(1): 37-43. (in Chinese))
|
[7] |
胡安峰, 陈博浪, 应宏伟. 土体本构模型对强度折减法分析基坑整体稳定性的影响[J]. 岩土力学, 2011, 32(增刊2): 592-597. (HU An-feng, CHEN Bo-lang, YING Hong-wei. Influences of constitutive models on overall stability analysis of deep excavations using strength reduction method[J]. Rock and Soil Mechanics, 2011, 32(S2): 592-597. (in Chinese))
|
[8] |
张天宝. 长条形基坑抗隆起稳定及整体稳定性分析方法[D]. 天津: 天津大学, 2016. (ZHANG Tian-bao. The methods for analyzing basal upheaval stability and general stability of long foundation pits[D]. Tianjin: Tianjin University, 2016. (in Chinese))
|
[9] |
宋 广, 宋二祥. 基坑开挖数值模拟中土体本构模型的选取[J]. 工程力学, 2014, 31(5): 86-94. (SONG Guang, SONG Er-xiang. Selection of soil constitutive models for numerical simulation of foundation pit excavation[J]. Engineering Mechanics, 2014, 31(5): 86-94. (in Chinese))
|
[10] |
董林伟, 张明义, 解云芸, 等. ABAQUS软件本构模型中屈服准则的参数研究[J]. 青岛理工大学学报, 2013, 34(1): 48-50. (DONG Lin-wei, ZHANG Ming-yi, XIE Yun-yun, et al. Study on the parameters of soil models yield criterion in ABAQUS software[J]. Journal of Qingdao University of Technology, 2013, 34(1): 48-50. (in Chinese))
|
[1] | Interface strength behavior of saturated clay under fully undrained condition[J]. Chinese Journal of Geotechnical Engineering. DOI: 10.11779/CJGE20241101 |
[2] | YAN Junbiao, KONG Lingwei, LI Tianguo, ZHOU Zhenhua. Effects of variable shear rate on residual strength of expansive soils and its engineering enlightenment[J]. Chinese Journal of Geotechnical Engineering, 2024, 46(7): 1445-1452. DOI: 10.11779/CJGE20230350 |
[3] | ZHOU Baochun, WANG Jiangwei, SHAN Lixia, LI Ying, LANG Mengting, KONG Lingwei. Torsional ring shear tests on residual strength of expansive soils with different swelling potentials[J]. Chinese Journal of Geotechnical Engineering, 2024, 46(6): 1325-1331. DOI: 10.11779/CJGE20230225 |
[4] | MIAO Fasheng, ZHAO Fancheng, WU Yiping, MENG Jiajia. Strength characteristics of slip zone soils of Tongjiaping landslide in Three Gorges Reservoir area based on seepage-ring shear tests[J]. Chinese Journal of Geotechnical Engineering, 2023, 45(7): 1480-1489. DOI: 10.11779/CJGE20220456 |
[5] | REN San-shao, ZHANG Yong-shuang, XU Neng-xiong, WU Rui-an. Mesoscopic response mechanism of shear surface roughness and residual strength in gravelly sliding zone soils[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(8): 1473-1482. DOI: 10.11779/CJGE202108012 |
[6] | DENG Hua-feng, ZHANG Heng-bin, LI Jian-lin, DUAN Ling-ling, ZHI Yong-yan, PAN Deng. Single specimen repeated loading method for determination of residual strength parameters of rock[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(2): 348-354. DOI: 10.11779/CJGE201902013 |
[7] | HU Zai-qiang, LIN Shan, LI Hong-ru, ZHANG Long. Factors residual strength of Luochuan loess[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(s1): 6-6. DOI: 10.11779/CJGE2017S1002 |
[8] | XU Cheng-shun, WANG Xin, DU Xiu-li, DAI Fu-chu, WANG Guo-sheng, GAO Yan. Experimental study on residual strength and index of shear strength characteristics of different clay soils[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(3): 436-443. DOI: 10.11779/CJGE201703006 |
[9] | WANG Gang, ZHANG Xue-peng, JIANG Yu-jing, ZHANG Yong-zheng. New shear strength criterion for rough rock joints considering shear velocity[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(8): 1399-1404. DOI: 10.11779/CJGE201508006 |
[10] | TANG Zhi-cheng, XIA Cai-chu, SONG Ying-long. New peak shear strength criteria for roughness joints[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(3): 571-577. |