Citation: | DONG Lin-wei, JIANG Yu-sheng, YANG Zhi-yong, CHENG Jin-guo, LIU Chao-qun, ZHANG Jia-jian. Experimental study and water-resistant mechanism of gaskets in joints of tunnel segments[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(3): 469-474. DOI: 10.11779/CJGE201703010 |
[1] |
GB 50446—2008 盾构法隧道施工与验收规范[S]. 北京: 中国建筑工业出版社, 2008. (GB 50466—2008 Code for construction and acceptance of shield tunneling method[S]. Beijing: China Architecture & Building Press, 2008. (in Chinese))
|
[2] |
王 民. 隧道盾构施工管片橡胶密封垫的材料和结构及产品性能特性[J]. 特种橡胶制品, 2005, 26(1): 42-46. (WANG Min. Material and structure of rubber gasket for shield driven tunnel segment and characteristic of the products[J]. Special Purpose Rubber Products, 2005, 26(1): 42-46. (in Chinese))
|
[3] |
王 湛. 水下盾构隧道弹性密封垫防水失效数值模拟研究[J]. 隧道建设, 2015, 35(11): 1164-1168. (WANG Zhan, Numerical study on waterproof failure mechanism of elastic sealing gasket of underwater shield-bored tunnel[J]. Tunnel Construction, 2015, 35(11): 1164-1168. (in Chinese))
|
[4] |
周济民, 何 川, 张 增. 铁路隧道管片衬砌承受高水压分界值研究[J]. 岩土工程学报, 2011, 33(10): 1583-1589. (ZHOU Ji-min, HE Chuan, ZHANG Zeng. Boundary value of high hydraulic pressure upon segment lining in railway tunnels[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(10): 1583-1589. (in Chinese))
|
[5] |
赵运臣, 肖龙鸽, 刘招伟, 等. 武汉长江隧道管片接缝防水密封垫设计与试验研究[J]. 隧道建设, 2008, 28(5): 570-575. (ZHAO Yun-chen, XIAO Long-ge, LIU Zhao-wei, et al. Experiment study and design on the water tight seal for reinforced concrete segment joint of Wuhan Yangtze River Tunnel[J]. Tunnel Construction, 2008, 28(5): 570-575. (in Chinese))
|
[6] |
金丰年, 范华林, 郭铁英. 地下工程管片密封橡胶承受高水压作用的力学分析[J]. 解放军理工大学学报(自然科学版), 2001, 2(4): 49-52. (JIN Fen-nian, FAN Hua-lin, GUO Tie-ying. Mechanical analysis of waterproof swelling rubber under high water pressure[J]. Journal of PLA University of Science and Technology, 2001, 2(4): 49-52. (in Chinese))
|
[7] |
刘 印, 张冬梅, 黄宏伟. 基于纵向不均匀沉降的盾构隧道渗漏水机理分析[J]. 铁道工程学报, 2011, 152(5): 66-70. (LIU Yin, ZHANG Dong-mei, HUANG Hong-wei. Analysis of mechanism of water leakage induced by longitudinal uneven settlement of shield tunnel[J]. Journal of Railway Engineering Society, 2011, 152(2): 66-70. (in Chinese))
|
[8] |
FAISAL I S, EDWARD J C, STANLEY L P. Concrete segment tunnel lining sealant performance under earthquake loading[J]. Tunneling and Underground Space Technology, 2012, 31: 51-60.
|
[9] |
徐芝纶. 弹性力学简明教程[M]. 北京: 高等教育出版社, 2002. (XU Zhi-lun. A concise course in elasticity[M]. Beijing: Higher Education Press, 2002. (in Chinese))
|
[10] |
MONTGOMERY T S, WILLIAM J M. Introduction to polymer viscoelasticity[M]. New York: A John Wiley & Sons, Inc., 2005.
|
[11] |
雷震宇. 盾构隧道管片橡胶密封垫的优化设计方法[J]. 地下空间与工程学报, 2010, 6(4): 770-774. (LEI Zhen-yu. An optimal design approach for the rubber sealing gasket in shield tunneling[J]. Chinese Journal of Underground Space and Engineering, 2010, 6(4): 770-774. (in Chinese))
|
[12] |
GB 50108—2008地下工程防水技术规范[S]. 北京: 中国建筑工业出版社, 2008. (GB 50108—2008 Technical code for waterproofing of underground engineering works[S]. Beijing: China Architecture & Building Press, 2008. (in Chinese))
|
[13] |
CECS 370 2014隧道工程防水技术规范[S]. 北京: 中国计划出版社, 2014. (CECS 370 2014 Technical code for tunnel engineering waterproofing[S]. Beijing: China Planning Press, 2014. (in Chinese))
|
[14] |
何 川, 曾东洋. 盾构隧道结构设计及施工对环境的影响[M]. 成都: 西南交通大学出版社, 2007. (HE Chuan, ZENG Dong-yang. The structure design of shield tunnel and the impact of construction on environment[M]. Chengdu: Southwest Jiaotong University Press, 2007. (in Chinese))
|
[15] |
朱祖熹, 陆 明, 柳 献. 隧道工程防水设计与施工[M].北京: 中国建筑工业出版社, 2012. (ZHU Zu-xi, LU Ming, LIU Xian. Waterproof design and construction of tunnel engineering[M]. Beijing: China Architecture & Building Press, 2012. (in Chinese))
|
[16] |
GB 18173.4—2010高分子防水材料 第4部分: 盾构法隧道管片用橡胶密封垫[S]. 2010. (GB 18173.4—2010 Polymer water-poof materials—part 4: rubber gasket for shield-driven tunnel[S]. 2010. (in Chinese))
|
[17] |
FAISAL S, EDWARD C, STANLEY P. Sealant behavior of gasketed-segmental concrete tunnel lining[C]// 4th International Conference on Earthquake Geotechnical Engineering. Thessaloniki-Greece. Greece, 2007: 1636-1648.
|