• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
CAI Zheng-yin, YANG Li-gong, HE Yong, HUANG Ying-hao. Installation of new bucket foundation breakwater and its influence on stability[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(12): 2287-2294. DOI: 10.11779/CJGE201612018
Citation: CAI Zheng-yin, YANG Li-gong, HE Yong, HUANG Ying-hao. Installation of new bucket foundation breakwater and its influence on stability[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(12): 2287-2294. DOI: 10.11779/CJGE201612018

Installation of new bucket foundation breakwater and its influence on stability

More Information
  • Received Date: October 15, 2015
  • Published Date: December 24, 2016
  • In light of the complexity of the installation process of the new bucket foundation breakwater, just some monitoring data cannot reflect this process roundly and particularly. By simplifying the bucket and using the simulation method for the installation of jacked piles, ABAQUS is used to simulate and analyze the soil-squeezing effect of the bucket. Through analysis, it is found that under the influence of the installation of the bucket, the soil near the bucket wall is affected by the horizontal squeezing effect, the soil close to the bucket is affected by the vertical squeezing and the friction effect, and the soil under the cover plate of the bucket between two bucket walls is affected by the vertical squeezing effect. Under the influences of the above effects, the deformations of the soil near the bucket wall can be divided into the submergence zone close to the bucket wall, the relative upheaval region zone a little far away from the bucket wall and the compression zone at the top of the soil between two bucket walls. These deformations cause the complex changes of the soil stress near the bucket wall. Based on the simulation of the soil-squeezing effect, its influence on the stability of the bucket is also analyzed, and the soil-squeezing effect can enhance the stability of the bucket.
  • [1]
    王元战, 王海龙, 付瑞清. 沉入式大直径圆筒码头稳定性计算方法研究[J]. 岩土工程学报, 2002, 24(4): 417-420. (WANG Yuan-zhan, WANG Hai-long, FU Rui-qing. Method of stability analysis of embedded large-diameter cylinder quay[J]. Chinese Journal of Geotechnical Engineering, 2002, 24(4): 417-420. (in Chinese))
    [2]
    WANG Yuan-zhan, ZHU Zhen-yu. An approach to stability analysis of embedded large-diameter cylinder quay[J]. China Ocean Engineering, 2002, 16(3): 383-393.
    [3]
    王元战, 王文良. 大圆筒结构计算及工程应用[M]. 北京: 人民交通出版社, 2008. (WANG Yuan-zhan, WANG Wen-liang. The computational method and engineering application of large-diameter cylindrical structure[M]. Beijing: China Communications Press, 2008. (in Chinese))
    [4]
    王元战, 王 琳, 黄长虹. 沉入式大圆筒防波堤稳定性计算方法[J]. 中国港湾建设, 2003(5): 17-20. (WANG Yuan-zhan, WANG Lin, HUANG Chang-hong. Computation methods of stability of embedded large cylinder breakwater[J]. China Harbour Engineering, 2003(5): 17-20. (in Chinese))
    [5]
    范庆来. 软土地基上深埋式大圆筒结构稳定性研究[D]. 大连: 大连理工大学, 2005. (FAN Qing-lai. A study of stability deeply embedded large-diameter cylindrical structure in soft ground[D]. Dalian: Dalian University of Technology, 2005. (in Chinese))
    [6]
    王元战, 华雷娜, 祝振宇. 软土地基条件下大型圆筒海岸结构稳定性计算方法[J]. 岩土力学, 2005, 26(1): 41-45. (WANG Yuan-zhan, HUA Lei-na, ZHU Zhen-yu. Stability calculation methods of large cylinder structure in coastal soft clay foundation[J]. Rock and Soil Mechanics, 2005, 26(1): 41-45. (in Chinese))
    [7]
    李 武, 陈 甦,程泽坤, 等. 水平荷载作用下桶式基础结构稳定性研究[J]. 中国港湾建设, 2012(5): 14-18. (LI Wu, CHEN Su, CHENG Ze-kun. Stability study of bucket-based structure on horizontal loading[J]. China Harbour Engineering, 2012(5): 14-18. (in Chinese))
    [8]
    肖 忠, 王元战, 章为民. 基于极限平衡法的箱筒型基础防波堤稳定性分析[J]. 岩土工程学报, 2013, 35(5): 828-833. (XIAO Zhong, WANG Yuan-zhan, ZHANG Wei-min. Stability analysis of bucket foundation breakwaters based on limit equilibrium method[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(5): 828-833. (in Chinese))
    [9]
    曹永勇, 蔡正银, 关云飞, 等. 新型桶式基础防波堤在负压下沉中的稳定性试验[J]. 水运工程, 2014(7): 41-45. (CAO Yong-yong, CAI Zheng-yin, GUAN Yun-fei, et al. Stability tests for new bucket-based break water driven by negative pressure[J]. Port & Waterway Engineering, 2014(7): 41-45. (in Chinese))
    [10]
    彭 劼, 施健勇, 黄 刚. 考虑挤土效应的桩基承载力分析[J]. 河海大学学报, 2002, 30(2): 105-108. (PENG Jie, SHI Jian-yong, HUANG Gang. The analysis of bearing capacity of pile foundation that considering the compaction effect[J]. Journal of Hohai University, 2002, 30(2): 105-108. (in Chinese))
    [11]
    樊向阳. 静压桩施工沉桩阻力及沉桩挤土效应研究[D]. 上海: 同济大学, 2007. (FAN Xiang-yang. Study of sinking-resistance and compaction effect of static press pile[D]. Shanghai: Tongji University, 2007. (in Chinese))
    [12]
    刘俊伟, 张明义, 谢 建, 等. 静压桩承载力时效性的模拟计算[J]. 工业建筑, 2010, 40(1): 64-67. (LIU Jun-wei, ZHANG Ming-yi, XIE Jian, et al. Computational simulation of the effect on bearing capacity of jacked pile[J]. Industrial Construction, 2010, 40(1): 64-67. (in Chinese))
    [13]
    杨 旭, 陈 飞, 练继建, 等. 考虑挤土效应的筒型基础沉放阻力数值分析及试验验证[J]. 岩土力学, 2014, 35(12): 3585-3591. (YANG Xu, CHEN Fei, LIAN Ji-jian, et al. Numerical analysis and test verification of penetration resistance for bucket foundation installation considering effect of soil squeezing[J]. Rock and Soil Mechanics, 2014, 35(12): 3585-3591. (in Chinese))
    [14]
    SHENG D C, EIGENBROD K D, WRIGGERS Peter. Finite element analysis of pile installation using large-slip frictional contact[J]. Computers and Geotechnics, 2005, 32: 17-26.
    [15]
    WRIGGERS P. Computational contact mechanics[M]. New York: Wiley, 2002.
    [16]
    高子坤. 静压桩沉桩挤土效应和桩间土固结特征理论分析[D]. 南京: 河海大学, 2007. (GAO Zi-kun. The analysis of the squeezing effect of the jacked-in pile and the theory of the soil consolidation feature between the piles[D]. Nanjing: Hohai University, 2007. (in Chinese))
    [17]
    胡中雄. 土力学与环境土工学[M]. 上海: 同济大学出版社, 1997. (HU Zhong-xiong. Soil mechanics and environment geotechnics[M]. Shanghai: Tongji University Press, 1997. (in Chinese))

Catalog

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return