Citation: | SUN Yu-yong. Discussion on “Calibration tests on diaphragm-type pressure cells”[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(11): 2135-2136. DOI: 10.11779/CJGE201611026 |
[1] |
芮 瑞, 吴端正, 胡 港, 等. 模型试验中膜式土压力盒标定及其应用[J]. 岩土工程学报, 2016, 38(5): 837-845. (RUI Rui, WU Duan-zheng, HU Gang, et al. Calibration tests on diaphragm-type pressure cells[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(5): 837-845. (in Chinese))
|
[2] |
TALESNICK M. Measuring soil contact pressure on a solid boundary and quantifying soil arching[J]. Geotechnical Testing Journal, 2005, 28(2): 171-179.
|
[3] |
TALESNICK M, HORANY H, DANCYGIER A N, et al. Measuring soil pressure on a buried model structure for the validation of quantitative frameworks[J]. Journal of Geotechnical and Geoenviron- mental Engineering, 2008, 134(6): 855-865.
|
[4] |
TALESNICK M. Measuring soil pressure within a soil mass[J]. Canadian Geotechnical Journal, 2013, 50(7): 716-722.
|
[5] |
ZHU B, JARDINE R J, FORAY P. The use of miniature soil stress measuring cells in laboratory applications involving stress reversals[J]. Soils and Foundations, 2009, 49(5): 675-688.
|
[1] | Effect of cyclic loading frequency on shear modulus decay characteristics of saturated sand[J]. Chinese Journal of Geotechnical Engineering. DOI: 10.11779/CJGE20240491 |
[2] | LI Rui-shan, CHEN Long-wei, YUAN Xiao-ming, LI Cheng-cheng. Experimental study on influences of different loading frequencies on dynamic modulus and damping ratio[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(1): 71-80. DOI: 10.11779/CJGE201701005 |
[3] | GU Xiao-qiang, YANG Jun, HUANG Mao-song, GAO Guang-yun. Combining bender element, resonant column and cyclic torsional shear tests to determine small strain shear modulus of sand[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(4): 740-746. DOI: 10.11779/CJGE201604020 |
[4] | DONG Quan-yang, CAI Yuan-qiang, XU Chang-jie, WANG Jun, SUN Hong-lei, GU Chuan. Measurement of small-strain shear modulus Gmax of dry and saturated sands by bender element and resonant column tests[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(12): 2283-2289. |
[5] | C. W. W. Ng, LI Qing, LIU Guo-bin. Measurements of small-strain inherent stiffness anisotropy of intact Shanghai soft clay using bender elements[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(1): 150-156. |
[6] | ZHANG Peisen, SHI Jianyong. Effect of stress path circumgyration on shear modulus under small strain and initial stress state[J]. Chinese Journal of Geotechnical Engineering, 2008, 30(3): 379-383. |
[7] | SUN Yizhen, SHAO Longtan. Experimental researches on Poisson’s ratio of silty soil based on local and whole deformation measurements[J]. Chinese Journal of Geotechnical Engineering, 2006, 28(8): 1033-1038. |
[8] | Lien Kwei Chien. A study on the shear modulus and damping ratio of reclaimed soil in Yun Lin nearshore area[J]. Chinese Journal of Geotechnical Engineering, 1998, 20(6): 86-92. |
[9] | Gu Yaozhang. Shear Modulus of the Marine Clay[J]. Chinese Journal of Geotechnical Engineering, 1995, 17(2): 29-35. |
[10] | Li Wenyang, Liu Huishan. Influence of Pore Water Pressure on Shear Modulus and Damping Ratio of Saturated Sands[J]. Chinese Journal of Geotechnical Engineering, 1983, 5(4): 56-67. |