• Indexed in Scopus
  • Source Journal for Chinese Scientific and Technical Papers and Citations
  • Included in A Guide to the Core Journal of China
  • Indexed in Ei Compendex
GONG Qiu-ming, HE Guan-wen, ZHAO Xiao-bao, MA Hong-su, LI Xiao-zhao, ZHANG Hao, MIAO Chong-tong. Influence of different cutter spacings on rock fragmentation efficiency of Beishan granite by TBM[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(1): 54-60. DOI: 10.11779/CJGE201501005
Citation: GONG Qiu-ming, HE Guan-wen, ZHAO Xiao-bao, MA Hong-su, LI Xiao-zhao, ZHANG Hao, MIAO Chong-tong. Influence of different cutter spacings on rock fragmentation efficiency of Beishan granite by TBM[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(1): 54-60. DOI: 10.11779/CJGE201501005

Influence of different cutter spacings on rock fragmentation efficiency of Beishan granite by TBM

More Information
  • Received Date: February 18, 2014
  • Published Date: January 19, 2015
  • In tunnel construction by tunnel boring machine (TBM), the excavation efficiency is highly related to cutter spacing. Due to the inhomogeneous, discontinuous and anisotropic characteristics in rocks, there are limitations to study rock fragmentation process by using numerical simulation. The purpose of in-situ penetration tests is to optimize the operational parameters for a specific TBM, thus this kind of tests cannot consider the effect of different cutter spacings on rock breaking process. The full-scale cutting experiment can minimize the size effect by using a large rock sample and the cutter spacing is able to be adjusted during the experiment, therefore the full-scale cutting experiment has been widely used in recent years. In order to study the influence of different cutter spacings on excavation efficiency by TBM cutter, the mechanical rock fragmentation experimental platform of Beijing University of Technology is used to conduct a series of rock cutting tests with five sets of cutter spacings. In these tests, the diameter of the disc cutter with a constant cross section is 432 mm. The size of test granite rock sample is 1000 mm×1000 mm×600 mm, taken from Beishan, Gansu Province of China. During the experiments, the three dimensional forces acting on the rolling cutter are recorded, and the rock chips collected after each cutting pass are weighed respectively. The impact of cutter spacing on excavation efficiency is analyzed by use of the obtained average normal force, average rolling force and specific energy. The results show that when penetration is small, the cutter spacing has no obvious effect on the average normal force and rolling force. However, with the increasing penetration, the cutter spacing has significant impact on both the average normal force and the rolling force. For all of the cutter spacings arranged in the tests, the increase in penetration will produce more rock chips but not always improve the efficiency of rock fragmentation at the same time. For Beishan intact granite, when the ratio of spacing to penetration is around 30, the specific energy reaches the minimum value, which means that the highest rock fragmentation efficiency can be expected under this condition.
  • [1]
    ZHAO J. Tunnelling in rock-present technology and future challenges[C]// Proceedings of World Tunnel Congress. Prague, 2007: 22-32.
    [2]
    GONG Q M. Development of a rock mass characteristics model for TBM penetration rate prediction[D]. Singapore: Nanyang Technological University, 2005: 256.
    [3]
    ACAROGLU O, OZDEMIR L, ASBURY B. A fuzzy logic model to predict specific energy requirement for TBM performance prediction[J]. Tunnelling and Underground Space Technology, 2008, 23(5): 600-608.
    [4]
    GONG Q M, JIAO Y Y, ZHAO J. Numerical modeling of the effects of joint spacing on rock fragmentation by TBM cutters[J]. Tunnelling and Underground Spacing Technology, 2006, 21(1): 46-55.
    [5]
    CHO J W, JEON S, YU S H, et al. Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamicfracturing method [J]. Tunnelling and Underground Space Technology, 2010, 25(3): 230-244.
    [6]
    BRULAND A. Hard rock tunnel boring[D]. Trondheim: Norwegian University of Science and Technology, 2000.
    [7]
    龚秋明, 佘祺锐, 侯哲生, 等. 高地应力作用下大理岩岩体的 TBM 掘进试验研究[J]. 岩石力学与工程学报, 2010, 29(12): 2522-2532. (GONG Qiu-ming, SHE Qi-rui, HOU Zhe-sheng, et al. Experimental study of TBM penetration in marble rock mass under high geostress[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(2): 2522-2532. (in Chinese))
    [8]
    ROXBOROUGH F F, PHILLIPS H R. Rock excavation by disc cutter[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1975, 12(12): 361-366.
    [9]
    SNOWDOWN R A, RYLEY M D, TEMPORAL J. A study of disc cutting in selected British rocks[J]. Int J Rock Mech Min Sci & Geomech, Abstr, 1982, 19: 107-121.
    [10]
    ROSTAMI J, OZDEMIR L. A new model for performance perdiction of hard rock TBMs[C]// Proceedings of Rapid Excavation and Tunnelling Conference. Boston, 1993: 793-809.
    [11]
    CHANG S H, CHOI S W, BAE G J, et al. Performance prediction of TBM disc cutting on granitic rock by the linear cutting test[J]. Tunnelling and Underground Space Technology, 2006, 21(3): 271.
    [12]
    BALCI C, TUMAC D. Investigation into the effects of different rocks on rock cuttability by a V-type disc cutter[J]. Tunnelling and Underground Space Technology, 2012, 30: 183-193.
    [13]
    CHO J W, JEON S, JEONG H Y, et al. Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linear-cutting-machine testing and photogrammetric measurement[J]. Tunnelling and Underground Space Technology, 2013, 35: 37-54.
    [14]
    TEALE R. The concept of specific energy in rock drilling[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1965, 2(1): 57-73.
    [15]
    GERTSCH R, GERTSCH L, ROSTAMI J. Disc cutting tests in colorado red granite: implications for TBM performance prediction[J]. International Journal of Rock Mechanics and Mining Sciences, 2007, 44(2): 238-246.
    [16]
    SNOWDOWN R A, RYLEY M D, TEMPORAL J. A study of disc cutting in selected British rocks[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1982, 19(3): 107-121.
  • Related Articles

    [1]MA Xingyu, WANG Lanmin, MA Wenguo, CHAI Shaofeng, LAI Yuru. Characteristics of dynamic shear strength of Xiji loess under different design intensities[J]. Chinese Journal of Geotechnical Engineering, 2023, 45(S2): 153-158. DOI: 10.11779/CJGE2023S20020
    [2]LUO Ming-xing, ZHANG Ji-ru, LIU Xiao-xuan. Dilatancy behaviors and equation of calcareous sand considering stress path and particle breakage[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(8): 1453-1462. DOI: 10.11779/CJGE202108010
    [3]SHI Bei-xiao, LIU Sai-chao, WU Xin-lei, CHANG Wei-kun. Dilatancy behaviors of rockfill materials considering particle breakage[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(7): 1360-1366. DOI: 10.11779/CJGE202107023
    [4]XIAO Wei-min, YU Huan, ZHU Zhan-yuan, LI Rui, LIU Wei-chao. Experimental study on shear dilatancy characteristics of thinly-infilled rock joints[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(8): 1499-1508. DOI: 10.11779/CJGE202008015
    [5]HAO Dong-xue, YUE Chong, CHEN Rong, REN Jie, CHEN Fu. Shear characteristics and stress-dilation relation of medium sand under normal to high pressures[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(4): 765-772. DOI: 10.11779/CJGE202004021
    [6]YANG Jun-tang, LIU Yuan-xue, ZHENG Ying-ren, HE Shao-qi. Deep mining of big data and model tests on dilatancy characteristics of dilatant soils[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(3): 513-522. DOI: 10.11779/CJGE202003013
    [7]KONG Yu-xia, SHENG Fei-fan, WANG Hui-juan. Stress-dilatancy properties for fiber-reinforced sand[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(12): 2249-2256. DOI: 10.11779/CJGE201812012
    [8]LIU Mengcheng, GAO Yufeng, LIU Hanlong. Study on shear dilatancy behaviors of rockfills in large-scale triaxial tests[J]. Chinese Journal of Geotechnical Engineering, 2008, 30(2): 205-211.
    [9]ZHAN Liangtong, NG Charles W W. Effect of suction on shear strength and dilatancy of an unsaturated expansive clay[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(1): 82-87.
    [10]Shao Shengjun, Xie Dingyi. New consideration on nonlinear and dilatancy deformation characteristics of soils[J]. Chinese Journal of Geotechnical Engineering, 2000, 22(1): 75-79.

Catalog

    Article views (496) PDF downloads (535) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return