Citation: | ZHOU Yan-guo, WANG Zhi-nan, MA Qiang, LIANG Tian, CHEN Yun-min. Development and performance testing of in-flight miniature CPTu equipment on ZJU-400 centrifuge[J]. Chinese Journal of Geotechnical Engineering, 2022, 44(S2): 11-15. DOI: 10.11779/CJGE2022S2003 |
[1] |
马淑芝, 汤艳春, 孟高头. 孔压静力触探测试机理、方法及工程应用[M]. 武汉: 中国地质大学出版社, 2007.
MA Shu-zhi, TANG Yan-chun, MENG Gao-tou. Piezocone Penetration Test Mechanism, Methods and Its Engineering Application[M]. Wuhan: China University of Geosciences Press, 2007. (in Chinese)
|
[2] |
蔡国军, 刘松玉, 童立元, 等. 孔压静力触探(CPTU)测试成果影响因素及原始数据修正方法探讨[J]. 工程地质学报, 2006, 14(5): 632–636. https://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ200605010.htm
CAI Guo-jun, LIU Song-yu, TONG Li-yuan, et al. General factors affecting interpretation and corrections of primary data from piezocone penetration test(cptu)[J]. Journal of Engineering Geology, 2006, 14(5): 632–636. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ200605010.htm
|
[3] |
BOLTON M D, GUI M W, GARNIER J, et al. Centrifuge cone penetration tests in sand[J]. Géotechnique, 1999, 49(4): 543–552. doi: 10.1680/geot.1999.49.4.543
|
[4] |
MA Q, et al. A state parameter-based scaling law for centrifuge modelling[J]. Soil Dynamics and Earthquake Engineering, 2022, 162: 107487. doi: 10.1016/j.soildyn.2022.107487
|
[5] |
林军, 刘松玉, 程月红, 等. 基于孔压静力触探的江苏地区软土分类研究应用[J]. 岩土工程学报, 2021, 43(增刊2): 241–244. doi: 10.11779/CJGE2021S2057
LIN Jun, LIU Song-yu, CHENG Yue-hong, et al. Classification of soft clay in Jiangsu Province based on piezocone penetration tests[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(S2): 241–244. (in Chinese) doi: 10.11779/CJGE2021S2057
|
[6] |
TANI K Z, et al. Development of centrifuge cone penetration test to evaluate the undrained shear strength profile of a model clay bed[J]. Soils and Foundations, 1995, 35(2): 37–47. doi: 10.3208/sandf1972.35.2_37
|
[1] | ZHANG Junjie, GU Xingwen, REN Guofeng, ZHOU Chuner, WANG Nianxiang. Centrifugal model tests on deformation characteristics of pile-net composite foundation under super-large loads[J]. Chinese Journal of Geotechnical Engineering, 2024, 46(S1): 212-216. DOI: 10.11779/CJGE2024S10048 |
[2] | CHEN Hang, CHENG Yonghui, HU Shenggang, LI Bo. Centrifugal model tests on deformation characteristics of a bank collapse section in middle reaches of Yangtze River[J]. Chinese Journal of Geotechnical Engineering, 2024, 46(S1): 127-131. DOI: 10.11779/CJGE2024S10007 |
[3] | XU Guangming, WANG Nianxiang, GU Xingwen, REN Guofeng, ZHOU Chun'er, WU Jiawu. Preliminary study on influences of model container constraint on large-deformation failure behaviors by centrifuge modeling[J]. Chinese Journal of Geotechnical Engineering, 2023, 45(2): 232-242. DOI: 10.11779/CJGE20220442 |
[4] | SHEN Chao, BO Jing-shan, ZHANG Xue-dong, SUN Qiang-qiang, WANG Lei. Centrifugal model tests on surface deformation and setback distance of reverse faults[J]. Chinese Journal of Geotechnical Engineering, 2022, 44(3): 420-427. DOI: 10.11779/CJGE202203003 |
[5] | ZHENG Da, ZHANG Shuo, ZHENG Guang. Centrifugal model tests on toppling deformation of counter-tilt layered rock slopes based on change of slope angle[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(3): 439-447. DOI: 10.11779/CJGE202103006 |
[6] | FENG Shen-duo, JIANG Xiao-guang, YANG Zhi-yin, ZHANG Jun, ZHUO Zhi-fei. Application and deformation compatibility of combined support of pile (wall)-bracing-anchor[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(suppl): 456-460. |
[7] | LI Ming, ZHANG Ga, LEE C F, ZHANG Jian-min. Centrifugal model tests on excavation-induced deformation of slopes[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(4): 667. |
[8] | GAO Changsheng, WEI Rulong, CHEN Shengshui. Centrifugal model tests on deformation of slopes reinforced with piles[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(1): 145-148. |
[9] | HU Zaiqiang, SHEN Zhujiang, XIE Dingyi. The FEM analysis on centrifugal model test of inundation deformation of structural loess canal[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(5): 637-640. |
[10] | ZHANG Zhiyong, FU Deming, YANG Guoxiang. Research on deformation distribution law of slope in Large dry-dock by geotechnical centrifuge model test and prototype observation[J]. Chinese Journal of Geotechnical Engineering, 2003, 25(1): 36-40. |