Advanced Search

    column
    Influences of filling replacement and drainage modification on stability of water conveyance canals in North Xinjiang
    DENG Ming-jiang, CAI Zheng-yin, GUO Wan-li, HUANG Ying-hao, ZHANG Chen
    2021, 43(5): 789-794. DOI: 10.11779/CJGE202105001
    Abstract PDF
    Engineering evaluation method for overall stability of slurry trenches
    HUANG Mao-song, WANG Hong-yu, TAN Ting-zhen, LI Yao-liang
    2021, 43(5): 795-803. DOI: 10.11779/CJGE202105002
    Abstract PDF
    Influences of construction of foundation pits on deformation of adjacent operating tunnels in whole process based on monitoring data
    XU Si-fa, ZHOU Qi-hui, ZHENG Wen-hao, ZHU Yong-qiang, WANG Zhe
    2021, 43(5): 804-812. DOI: 10.11779/CJGE202105003
    Abstract PDF
    Time series prediction for ground settlement in portal section of mountain tunnels
    WANG Shu-hong, ZHU Bao-qiang
    2021, 43(5): 813-821. DOI: 10.11779/CJGE202105004
    Abstract PDF
    Effect of moisture content on dynamic response law and failure mode of accumulation slopes under frequent micro-seismic actions
    YANG Zhong-ping, LI Shi-qi, LI Wan-kun, LI Jin, HU Yuan-xin
    2021, 43(5): 822-831. DOI: 10.11779/CJGE202105005
    Abstract PDF
    Influences of shear rate and loading frequency on shear behavior of geogrid-soil interfaces
    LIU Fei-yu, ZHU Chen, WANG Jun
    2021, 43(5): 832-840. DOI: 10.11779/CJGE202105006
    Abstract PDF
    Triaxial creep properties and model of red sandstone under freeze-thaw environment
    SONG Yong-jun, ZHANG Lei-tao, REN Jian-xi, CHEN Jia-xing, CHE Yong-xin, YANG Hui-min, BI Ran
    2021, 43(5): 841-849. DOI: 10.11779/CJGE202105007
    Abstract PDF
    Stability analysis of horizontal-vertical ribs-reinforced slopes based on improved minimum potential energy method
    JIANG Jian-guo, CHEN Yuan, LIU Sun-guang, ZHAO Fa-jia
    2021, 43(5): 850-857. DOI: 10.11779/CJGE202105008
    Abstract PDF
    Semi-analytical solution to dynamic response of transversely isotropic layered foundation-thin plate structure under moving loads
    FENG Duo, XU Lin-rong, CAI Yu, SU Na
    2021, 43(5): 858-866. DOI: 10.11779/CJGE202105009
    Abstract PDF
    Investigation of effect of spudcan penetration on adjacent platform piles
    ZHANG Hai-yang, LIU Run, JIA Zhao-lin
    2021, 43(5): 867-876. DOI: 10.11779/CJGE202105010
    Abstract PDF
    Blasting vibration response and control of high rock slopes of thin mountain
    SUN Peng-chang, LU Wen-bo, LEI Zhen, CHEN Ming, LI Rui-ze, LI Fu-qian
    2021, 43(5): 877-885. DOI: 10.11779/CJGE202105011
    Abstract PDF
    Cyclic bounding surface model for carbonate sand incorporating particle breakage
    WANG Zhao-nan, WANG Gang, YE Qin-guo, ZHA Jing-jing
    2021, 43(5): 886-892. DOI: 10.11779/CJGE202105012
    Abstract PDF
    Strength characteristics of soda residue-fly ash mixture with different proportions and phases
    MA Jia-xiao, YAN Nan, BAI Xiao-yu, ZHANG Ming-yi, LIU Jun-wei, WANG Yong-hong
    2021, 43(5): 893-900. DOI: 10.11779/CJGE202105013
    Abstract PDF
    An elastoplastic dynamic constitutive model for saturated soft clay based on bounding surface theory
    FENG Shuang-xi, LEI Hua-yang
    2021, 43(5): 901-908. DOI: 10.11779/CJGE202105014
    Abstract PDF
    Seepage clogging characteristics of rock and soil porous media using LBM-IMB-DEM simulation method
    JIN Lei, ZENG Ya-wu, CHENG Tao, LI Jing-jing
    2021, 43(5): 909-917. DOI: 10.11779/CJGE202105015
    Abstract PDF
    Load and resistance in stability analysis of geotechnical engineering with safety factor method
    LI Guang-xin
    2021, 43(5): 918-925. DOI: 10.11779/CJGE202105016
    Abstract PDF
    Experimental study on bearing capacity of moderately weathered mudstone in Chengdu area
    ZHENG Li-ning, CHEN Ji-bin, ZHOU Qi-jian, FENG Shi-qing, LOU Yi-bin, SHEN Pan
    2021, 43(5): 926-932. DOI: 10.11779/CJGE202105017
    Abstract PDF
    Extraction method for micro-structure parameters of clay based on imaging principles of scanning electron microscope
    SHEN Zhi-fu, SUN Tian-you, BAI Yu-fan, JIANG Ming-jing, ZHOU Feng
    2021, 43(5): 933-939. DOI: 10.11779/CJGE202105018
    Abstract PDF
    Internal deformation characteristics of soil samples in additive manufacturing based on FBG technology
    WANG Nan-su, HONG Cheng-yu, ZHU Min, ZHANG Yi-fan, WANG Jun
    2021, 43(5): 940-947. DOI: 10.11779/CJGE202105019
    Abstract PDF
    Centrifuge test on single pile with different rigidities in saturated clay under cyclic lateral loading
    LI Sen, YU Jian, HUANG Mao-song
    2021, 43(5): 948-954. DOI: 10.11779/CJGE202105020
    Abstract PDF
    Creep characteristics and model study of composite geomembrane with different film thicknesses
    YANG Wu, SHI Ke-bin, HE Jian-xin, LIU Liang, YANG Hai-hua
    2021, 43(5): 955-961. DOI: 10.11779/CJGE202105021
    Abstract PDF
    Shear characteristics of hydrated needle-punched GCL+GM composite liners at different temperatures
    HAN Zhuo-wei, LIN Hai, SHI Jian-yong
    2021, 43(5): 962-967. DOI: 10.11779/CJGE202105022
    Abstract PDF
    Meticulous evaluation of rock mass quality in mine engineering based on machine learning of core photos
    LIU Fei-yue, LIU Yi-han, YANG Tian-hong, XIN Jun-chang, ZHANG Peng-hai, DONG Xin, ZHANG Hai-tao
    2021, 43(5): 968-974. DOI: 10.11779/CJGE202105023
    Abstract PDF
    Mechanical concept errors in anti-sliding stability computational model of "vector sum method"
    SUN Jian-sheng
    2021, 43(5): 975-980. DOI: 10.11779/CJGE202105024
    Abstract PDF