Advanced Search
  • 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引（EI）收录期刊
  • Scopus数据库收录期刊
Volume 40 Issue 3
Turn off MathJax
Article Contents
Abstract
References
ZHAO Zhi-peng, MA Ming, WANG Gang, WANG Ke. New method of joint surface morphology for calculating JRC[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(3): 576-582. DOI: 10.11779/CJGE201803024
Citation: ZHAO Zhi-peng, MA Ming, WANG Gang, WANG Ke. New method of joint surface morphology for calculating JRC[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(3): 576-582. DOI: 10.11779/CJGE201803024
shu

New method of joint surface morphology for calculating JRC

  • 1. Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China;
    2. State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China

More Information
  • Received Date: May 24, 2017
  • Published Date: March 24, 2018
    Graphical Abstract
    • Abstract
  • In order to explore the expression that well describes the fluctuations of the section line of joints, ten typical JRC curves proposed by Barton are discretized by using the interval sampling, and then the discrete data points are fitted by different functions. The expression obtained from the fitting of the data is used to calculate the joint parameters of the standard JRC curve. Comparison between the results of the fitting and the calculated values of the joint parameters shows that the section line of the joint conforms to the trigonometric function. The approximate function obtained by the sine function approximation can well characterize the fluctuation of the joint. The values of JRC calculated by the approximate joint curve replaced by the sine approximate function are more accurate than those obtained by using the discrete points. This also makes it possible to accurately estimate the joint shear strength by using the JRC-JCS model.
    • FullText(HTML)
    • References (17)
  • [1]
    BARTON N.A relationship between joint roughness and joint shear strength[C]// Proceedings of the International Symposium on Rock Fracture. Nancy, 1971: 1-8.
    [2]
    BARTON N, CHOUBEY V.The shear strength of rock joints in theory and practice[J]. Rock Mechanics, 1977, 10(1/2): 1-54.
    [3]
    TSE R, CRUDEN D M.Estimating joint roughness coefficients[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1979, 16(5): 303-307.
    [4]
    YU X B, VAYSSADE B.Joint profiles and their roughness parameters[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1991, 28(4): 333-336.
    [5]
    YANG Z Y, LO S C, DI C C.Reassessing the joint roughness coefficient(JRC) estimation using Z2[J]. Rock Mechanics & Rock Engineering, 2001, 34(3): 243-251.
    [6]
    TATONE B S A, GRASSELLI G. A new 2D discontinuity roughness parameter and its correlation with JRC[J]. International Journal of Rock Mechanics & Mining Sciences, 2010, 47(8): 1391-1400.
    [7]
    MAERZ N H, FRANKLIN J A, BENNETT C P.Joint roughness measurement using shadow profilometry[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1990, 27(5): 329-343.
    [8]
    BEER A J, STEAD D, COGGAN J S.Technical note estimation of the joint roughness coefficient(JRC) by visual comparison[J]. Rock Mechanics and Rock Engineering, 2002, 35(1): 65-74.
    [9]
    STIMPSON B.A rapid field method for recording joint roughness profiles[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1982, 19(6): 345-346.
    [10]
    GADEMAWLA E S, KOURA M M, MAKSOUD T M, et al.Roughness parameters[J]. Journal of Materials Processing Technology, 2002, 123(1): 133-145.
    [11]
    LI Y, ZHANG Y B.Quantitative estimation of joint roughness coefficient using statistical parameters[J]. International Journal of Rock Mechanics & Mining Sciences, 2015, 77: 27-35.
    [12]
    孙辅庭, 佘成学, 万利台. Barton标准剖面 JRC与独立于离散间距的统计参数关系研究[J]. 岩石力学与工程学报, 2014, 33(a02): 3539-3544.
    (SUN Fu-ting, SHE Cheng-xeu, WAN Li-tai.Research on relationship between JRC of Barton’s standard profiles and statistic parameters independent of sampling interval[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(a02): 3539-3544. (in Chinese))
    [13]
    孙洪泉, 谢和平. 岩石断裂表面的分形模拟[J]. 岩土力学, 2008, 29(2): 347-352.
    (SUN Hong-quan, XIE He-ping.Fractal simulation of rock fracture surface[J]. Rock and Soil Mechanics, 2008, 29(2): 347-352. (in Chinese))
    [14]
    于广明, 谢和平, 王金安, 等. 地质断裂面分形性研究[J]. 煤炭学报, 1996, 21(5): 459-463.
    (YU Guang-ming, XIE He-ping, WANG Jin-an, et al.Fractal geometry of geological fracture[J]. Journal of China Coal Society, 1996, 21(5): 459-463. (in Chinese))
    [15]
    MANDELBROT B B.The fractal geometry of nature[M]. New York: W H Freeman, 1982: 361-366.
    [16]
    孙洪泉, 谢和平. 分形插值曲面及其维数定理[J]. 中国矿业大学学报, 1998(2): 217-220.
    (SUN Hong-quan, XIE He-ping.Fractal interpolated surface and its dimensional theorem[J]. Journal of China University of Mining & Technology, 1998(2): 217-220. (in Chinese))
    [17]
    谢和平. 岩石节理的分形描述[J]. 岩土工程学报, 1995, 17(1): 18-23.
    (XIE He-ping.Fractal discription of rock joints[J]. Chinese Journal of Geotechnical Engineering, 1995, 17(1): 18-23. (in Chinese))
    • Related Articles
  • Supplements (0)

Catalog

    Get Citation
    PDF
    XML
    Article views PDF downloads Cited by()
    Related
    Copyright © 2010 Editorial By Chinese Journal of Geotechnical Engineering 苏ICP备05007122号-11公安联网备案号：32010602011255
    Editorial Office address：34 Hujuguan,Nanjing 210024,ChinaPostal Code：210024Tel：025-85829534，85829556E-mail: ge@nhri.cn

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return