考虑多尺度结构的贯通节理岩体损伤摩擦耦合模型

刘武

doi:10.11779/CJGE201801015

考虑多尺度结构的贯通节理岩体损伤摩擦耦合模型 English Version

刘武

1.合肥工业大学土木水利工程学院,安徽合肥 230009
2.武汉大学水工岩石力学教育部重点实验室,湖北武汉430072

基金项目: 中央高校基本科研业务费专项资金项目（JZ2015HGBZ0480）; 武汉大学水工岩石力学教育部重点实验室开放基金项目（RMHSE1503）

详细信息

作者简介:
刘武(1988-),男,博士,讲师,主要从事裂隙岩体水力耦合分析方面的研究工作。E-mail：liuwu168@163.com。

中图分类号: TU452
计量
- 文章访问数: 468
- HTML全文浏览量: 3
- PDF下载量: 285
出版历程
- 收稿日期: 2016-10-23
- 发布日期: 2018-01-24

Coupled damage and friction model for persistent fractured rocks considering multi-scale structures

LIU Wu

1.School of Civil Engineering, Hefei University of Technology, Hefei 230009, China
2.Key Laboratory of Rock Mechanics in Hydraulic Structural Engineering of Ministry of Education, Wuhan University, Wuhan 430072, China

摘要

摘要: 基于贯通节理岩体结构的多尺度特征,采用两步均匀化方法,给出了节理岩体在复杂荷载作用下的自由焓表达式,建立了节理岩体损伤摩擦耦合本构模型。模型可同时考虑岩块损伤扩展、微裂纹滑移剪胀、法向刚度恢复,节理面多阶凸起体滑移磨损、剪胀演化以及节理与岩块相互作用等特征,较好地反映岩体内部微裂纹、节理等不同尺度微结构变化对其力学特性的影响。采用Lac du Bonnet花岗岩三轴压缩试验、花岗岩节理剪切试验以及不同节理倾角与不同围压下Martinsburg板岩三轴压缩强度试验等成果对模型进行了验证,模型预测值与实测值相当吻合,论证了模型的准确性。
- 贯通节理岩体 /
- 多尺度结构 /
- 两步均匀化方法 /
- 损伤摩擦耦合
Abstract: A coupled damage and friction constitutive model for persistent jointed rocks based on a two-step homogenization technique is proposed considering the influences of anisotropic damage growth of intact rocks, mobilized dilatancy behavior of microcracks, recovery of normal stiffness due to normal closure of closed microcracks, mobilized degradation of multi-order asperities of joints, shear dilatancy of joints, and interaction between joints and rocks. The effects of multi-scale structures (i.e., joint and microcracks) on the deformation characteristics of fractured rocks are better addressed by the proposed model. The existing laboratory triaxial compression tests on crystalline rocks, shear tests on joint specimens, together with triaxial compressive strength tests on Martinsburg slate under different confining pressures and joint configurations, are used to validate the proposed model. The good agreements between the model predictions and the test results demonstrate the accuracy of the proposed model.
- persistent jointed rock /
- multi-scale structure /
- two-step homogenization technique /
- damage-friction coupling

HTML全文

参考文献(24)

[1]	陈益峰, 李典庆, 荣冠, 等. 脆性岩石损伤与热传导特性的细观力学模型[J]. 岩石力学与工程学报, 2011, 30(10): 1959-1969. (CHEN Yi-feng, LI Dian-qing, RONG Guan, et al.A micromechanical model for damage and thermal conductivity of brittle rocks[J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(10): 1959-1969. (in Chinese))
[2]	ZHU Q Z, KONDO D, SHAO J F.Micromechanical analysis of coupling between anisotropic damage and friction in quasi brittle materials: Role of the homogenization scheme[J]. International Journal of Solids and Structures, 2008, 45(5): 1385-1405.
[3]	ZHU Q Z, KONDO D, SHAO J F, et al.Micromechanical modelling of anisotropic damage in brittle rocks and application[J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(4): 467-477.
[4]	陈益峰, 胡冉, 周创兵, 等. 热-水-力耦合作用下结晶岩渗透特性演化模型[J]. 岩石力学与工程学报, 2013, 32(11): 2185-2195. (CHEN Yi-feng, HU Ran, ZHOU Chuang-bing, et al.A micromechanical model for damage and thermal conductivity of brittle rocks[J]. Chinese Journal of Rock Mechanics and Engineering, 2013, 32(11): 2185-2195. (in Chinese))
[5]	周创兵, 陈益峰, 姜清辉, 等. 岩体结构面HM耦合分析的界面层模型[J]. 岩石力学与工程学报, 2008, 27(6): 1081-1093. (ZHOU Chuang-bing, CHEN Yi-feng, JIANG Qing-hui, et al.An interfacial layer model for coupled hydromechanical analysis in geological discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(6): 1081-1093. (in Chinese))
[6]	BANDIS S C, LUMSDEN A C, BARTON N R.Fundamentals of rock joint deformation[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1983, 20(6): 249-268.
[7]	PLESHA M E.Constitutive models for rock discontinuities with dilatancy and surface degradation[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1987, 11(4): 345-362.
[8]	DONG J J, PAN Y W.A hierarchical model of rough rock joints based on micromechanics[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1996, 33(2): 111-123.
[9]	LEE H S, PARK Y J, CHOC T F, et al.Influence of asperity degradation on the mechanical behavior of rough rock joints under cyclic shear loading[J]. International Journal of Rock Mechanics and Mining Sciences, 2001, 38(7): 967-980.
[10]	陈益峰, 周创兵, 盛永清. 应变敏感的裂隙及裂隙岩体水力传导特性研究[J]. 岩石力学与工程学报, 2006, 25(12): 2441-2452. (CHEN Yi-feng, ZHOU Chuang-bing, SHENG Yong-qing.Strain-dependent hydraulic conductivity for single rock fracture and fractured rock mass[J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(12): 2441-2452. (in Chinese))
[11]	CAI M, HORII H.A constitutive model of highly jointed rock masses[J]. Mechanics of Materials, 1992, 13(3): 217-246.
[12]	朱维申, 张强勇. 节理岩体脆弹性断裂损伤模型及其工程应用[J]. 岩石力学与工程学报, 1999, 18(3): 245-249. (ZHU Wei-shen, ZHANG Qiang-yong.Brittle elastic fracture damage constitutive model of jointed rock mass and its application to engineering[J]. Chinese Journal of Rock Mechanics and Engineering, 1999, 18(3): 245-249. (in Chinese))
[13]	袁小清, 刘红岩, 刘京平. 非贯通裂隙岩体三维复合损伤本构模型[J]. 岩土工程学报, 2016, 38(1): 91-99. (YUAN Xiao-qing, LIU Hong-yan, LIU Jing-ping.3-D constitutive model for rock masses with non-persistent joints based on compound damage[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(1): 91-99. (in Chinese))
[14]	CHEN Y, HU S, ZHOU C, et al.Micromechanical modeling of anisotropic damage-induced permeability variation in crystalline rocks. Rock Mechanics and Rock Engineering 2014, 47(5): 1775-1791.
[15]	DONATH F A.Strength variation and deformational behavior in anisotropic rock[C]// JUDD W R ed. State of Stress in the Earth’s Crust. NewYork: Elsevier, 1964: 281-297.
[16]	DORMIEUX L, KONDO D, Ulm F-J.Microporomechanics[M]. New York: Wiley, 2006.
[17]	ZHU Q Z, SHAO J F.A refined micromechanical damage-friction model with strength prediction for rock-like materials under compression[J]. International Journal of Solids and Structures, 2015, 60: 75-83.
[18]	李银平, 王元汉, 陈龙珠, 等. 含预制裂纹大理岩的压剪试验分析[J]. 岩土工程学报, 2004, 26(1): 120-124. (LI Yin-ping, WANG Yuan-han, CHEN Long-zhu, et al.Experimental research on pre-existing cracks in marble under compression[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(1): 120-124. (in Chinese))
[19]	ZHANG X P, LIU Q, WU S, et al.Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression[J]. Engineering Geology, 2015, 199: 74-90.
[20]	WONG R H C, LIN P. Numerical study of stress distribution and crack coalescence mechanisms of a solid containing multiple holes[J]. International Journal of Rock Mechanics and Mining Sciences, 2015, 79: 41-54.
[21]	ASADI M, BAGHERIPOUR M H.Modified criteria for sliding and non-sliding failure of anisotropic jointed rocks[J]. International Journal of Rock Mechanics and Mining Sciences, 2015, 73(1): 95-101.
[22]	PIETRUSZCZAK S, LYDZBA D, SHAO J F.Modelling of inherent anisotropy in sedimentary rocks[J]. International Journal of Solids and Structures, 2002, 39(3): 637-648.
[23]	PIETRUSZCZAK S, MROZ Z.Formulation of anisotropic failure criteria incorporating a microstructure tensor[J]. Computers and Geotechnics, 2000, 26(2): 105-112.
[24]	BAZANT Z P, OH B H.Efficient numerical integration on the surface of a sphere[J]. ZAMM, 1986, 66(1): 37-49.