基于Kӧtter方程的盾构掘进面上被切削土体受力研究

苏伟林; 李兴高; 金大龙

doi:10.11779/CJGE201906009

基于Kӧtter方程的盾构掘进面上被切削土体受力研究 English Version

北京交通大学城市地下工程教育部重点实验室,北京 100044

基金项目: 国家重点基础研究发展计划（“973”计划）（2015CB057800）

详细信息

作者简介:
苏伟林(1990— ),男,博士研究生,主要从事盾构法隧道建设方面的研究。E-mail: suwelin@126.com。

通讯作者:
李兴高，E-mail：lxg_njtu@163.com

中图分类号: TU921
计量
- 文章访问数: 241
- HTML全文浏览量: 5
- PDF下载量: 106
出版历程
- 收稿日期: 2018-05-01
- 发布日期: 2019-06-24

Force states of soils under shield cutting in excavation face based on Kӧtter equation

Key Laboratory of Urban Underground Engineering of Ministry of Education, Beijing Jiaotong University, Beijing 100044, China

摘要

摘要: 为了计算不同土体性质与不同掘进参数下盾构刮刀与土体之间的作用力以及由此带来的切削扭矩,引入了修正后的Kӧtter方程作为补充方程,求解出开挖面上土体在被动切削至破坏时滑动面上的应力分布,建立了被切削土体受力模型,求解出刮刀刃面与土体之间的正压力p、摩擦力Q与侧向土体间抗剪阻力U,进而推导出刀盘切削扭矩T的计算公式。分析得到特定刀盘上刮刀的p,Q,U值随土体c,φ值增大而增大,通过适当提高刮刀刃面粗糙度来增大摩擦可使土体更易被切至破坏;p,Q,U值随刀盘转速ω增大而减小,p,Q随支护荷载p线性增大且p对于被切削土体受力的影响在砂性土中较大,最终给出特定刀盘掘进至部分种类土体中的切削扭矩值作为工程参考。
- Kotter方程 /
- 盾构刮刀 /
- 被切削土体 /
- 滑动面应力 /
- 刀具受力 /
- 切削扭矩
Abstract: To calculate the forces between shield scraper and soils as well as the cutting torque caused by them with different tunneling parameters in different soils, a modified Kӧtter equation is introduced as a supplement to solve the stress distribution on the sliding face when the soils in excavation face are being passively cut to a damage state. A mechanical model for cutting soils is established, and the pressure and friction between the soils and the surface of shield scraper and the lateral shear resistance are solved. Then the method for calculating the cutting torque of cutter head is derived. It can be acquired that the pressure, friction and lateral shear resistance increase with the cohesive force and internal friction angle and decrease with the rotation rate, which illustrates that a properly coarser scraper surface makes the soils easier to be cut, and a lower rotation rate can reduce the force of the tools. The pressure and friction increase linearly with the shield support pressure, which is more obvious in sand. Some cutting torques in different soil types are given as engineering references ultimately.
- Kӧ /
- tter equation /
- /
- shield scraper /
- cutting soil /
- sliding face stress

HTML全文

参考文献(12)

[1]	夏毅敏, 卞章括, 胡承欢, 等. 复合式土压平衡盾构机刀盘性能综合评价方法[J]. 机械工程学报, 2014, 50(21): 1-9. (XIA Yi-min, BIAN Zhang-kuo, HU Cheng-huan, et al.Performance cmprehensive ealuation of cmposite erth pessure blanced shield machine cutter head[J]. Chinese Journal of Mechanical Engineering, 2014, 50(21): 1-9. (in Chinese))
[2]	徐前卫, 朱合华, 丁文其, 等. 均质地层中土压平衡盾构施工刀盘切削扭矩分析[J]. 岩土工程学报, 2010, 32(1): 47-54. (XU Qian-wei, ZHU He-hua, DING Wen-qi, et al.Cutting torque during tunnelling process of earth pressure balance shield machine in homogeneous ground[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(1): 47-54. (in Chinese))
[3]	HE Chuan, WANG Bo.Research progress and development trends of highway tunnels in China[J]. Journal of Modern Transportation, 2013, 21(4): 209-223.
[4]	徐小荷, 余静. 岩石破碎学[M]. 北京:w 煤炭工业出版社, 1984. (XU Xiao-he, YU Jing.Rock fragmentation[M]. Beijing: China Coal Industry Publishing House, 1984. (in Chinese))
[5]	EVANS I.The force required to cut coal with blunt wedges[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1965, 2(1): 1-12.
[6]	NISHIMATSU Y.The mechanics of rock cutting[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1972, 9(2): 261-270.
[7]	暨智勇. 盾构掘进机切刀切削软岩和土壤受力模型研究及实验验证[D]. 长沙: 中南大学, 2009. (JI Zhi-yong.Research and experimental verification of stress model of cutting machine cutting soft rock and soil by shield tunnelling machine[D]. Changsha: Central South University, 2009. (in Chinese))
[8]	崔国华, 王国强, 王继新, 等. 全断面盾构掘进机切削刀具的计算力学模型求解[J]. 吉林大学学报(工学版), 2008, 38(增刊2): 144-148. (CUI Guo-hua, WANG Guo-qiang, WANG Ji-xin, et al.Cutting dynamic model for cutters of shield machine under soft soil[J]. Journal of Jilin University Engineering and Technology Edition, 2008, 38(S2): 144-148. (in Chinese))
[9]	TERZAGHI K.Theoretical soil mechanics[M]. New York: John Wiley and Sons, Inc, 1943.
[10]	KӧTTER F. Die bestimmung des drucks an gekrümmten gleitflӓchen, eine aufgabe aus der lehre vom erddruck[J]. Sitzung Der Physikalisch-Mathematischen Classe Vom, 1903: 229-233.
[11]	孔德顺. Kӧtter方程在挡土墙被动土压力求解中的应用[D]. 南京: 河海大学, 2008. (KONG De-shun.Application of Kӧtter equation to solving passive earth pressure of retaining wall[D]. Nanjing: Hohai University, 2008. (in Chinese))
[12]	余志刚. 泥质粉砂岩地层泥水盾构掘进参数变化规律及关联性分析[J]. 施工技术, 2018, 47(1): 116-121. (YU Zhi-gang.Change rule and correlation analysis of slurry shield tunneling parameters under argillaceous siltstone formation[J]. Construction Technology, 2018, 47(1): 116-121. (in Chinese))

施引文献(5)

期刊类型引用(3)

1.	应宏伟，吕忠泽. 考虑刀土摩擦的砂土盾构隧道开挖面支护压力计算方法. 中南大学学报(自然科学版). 2024(03): 1082-1091 . 百度学术
2.	王凯，曾垂刚，李治国. 超大直径泥水盾构土岩交互地层掘进载荷计算与分析. 隧道建设(中英文). 2022(05): 873-881 . 百度学术
3.	袁大军，吴俊，沈翔，金大龙，李兴高. 超高水压越江海长大盾构隧道工程安全. 中国公路学报. 2020(12): 26-45 . 百度学术